The Home Machinist!

Best...
http://www.yukiwa-usa.com/ikdc2/itemb94 ... c2&UID=102

Thanks Ed, I guess that's the one, will give it a shot.

Is not white lithium grease, I have that and is different. It has the consistency of vaseline but is the color of butter...kind of.

I have a Bison 8"/6 jaws chuck on my lathe and when I got it, it had a white/off white type of grease that is very slick and smooth. I want to take apart the chuck to clean it and would like to replace the grease with the same type. I have looked all over the place to find the grease but no luc...

I have this one.

http://www.use-enco.com/CGI/INSRIT?PMAK ... PG=INLMK32

I have a small project to do for a reel spool that will work in a wet environment. The shaft is 7mm OD and the spool is 19mm ID. Between the shaft and the spool are 3 ball bearings 7x19x5mm (reel is made in Japan and all sizes are metric). The real sizes of the ball bearings are: - 6.998mm - 18.997m...

OK, never tried that size. Anybody mounted anything in that hole?

Took me a long time to find the answer since I was looking for the same thing, here it is:
http://www.aloris.com/catalog/aloris-se ... -blade.pdf

I have a QCTP Phase II BXA and on the side of it is a threaded hole. What is the thread size of that thread? I have tried all types of screws and none fit. Any idea please?
Also, what is that hole for? Did you attach any things to it?

Where at Caswell did you find the Oxpho-Blue?

Cutting 2" radius is not a problem, the tool is, need to re-sharpen the T blade often...
Here is my lathe (sold by ENCO under name Turn Pro)

http://www1.mscdirect.com/cgi/NNSRIT2?P ... rchResults

Have seen those types but I am limited at the depth of cut. Sometimes I need to go up to 2" deep to part off and need a flat blade.