Search found 39 matches
- Mon Dec 24, 2012 12:39 pm
- Forum: Lathes
- Topic: Opinions on the grizzly G4003g
- Replies: 14
- Views: 6956
Re: Opinions on the grizzly G4003g
Nipper, Which chuck did your machine come with? Mine came with two piece jaws. Leroy............ As did mine. Make sure that you drain and refill the gearbox as per the instructions after the initial run in. The 30WT ND oil came out quite dirty after the break in. This machine has run flawlessly,an...
- Sat Dec 22, 2012 4:58 pm
- Forum: Lathes
- Topic: Opinions on the grizzly G4003g
- Replies: 14
- Views: 6956
Re: Opinions on the grizzly G4003g
You guys help in my decision to purchase the G4003G lathe that will be delivered on Monday. Thanks again to all that responded. Leroy............ Wow that was a fast delivery. It took 4 months for mine to come in. I have been running mine since May primarily to build custom Rifles. I have no compla...
- Thu Aug 09, 2012 8:06 pm
- Forum: Request For Services
- Topic: Need tool post "T" nut machined
- Replies: 4
- Views: 15216
Re: Need tool post "T" nut machined
Job is done. Thanks to all who replied................Lew
- Wed Jul 18, 2012 9:04 am
- Forum: Request For Services
- Topic: Need tool post "T" nut machined
- Replies: 4
- Views: 15216
Re: Need tool post "T" nut machined
Hi Glenn: North west Florida, Citrus CountyGlenn Wegman wrote:What Country are you in?
- Wed Jul 18, 2012 3:40 am
- Forum: Request For Services
- Topic: Need tool post "T" nut machined
- Replies: 4
- Views: 15216
Need tool post "T" nut machined
Hi: I am looking for someone who can machine a tool post T nut to fit my new Lathe. I do not own a mill or have anyone around here who could do it. I have the blank nut and can supply a drawing of the tool post slot............Lew
- Sun Jun 10, 2012 12:38 pm
- Forum: Gunsmithing
- Topic: Way oil on semi auto pistol slides
- Replies: 2
- Views: 5128
Way oil on semi auto pistol slides
I was looking at the specs for ISO-32 way oil. It is designed for sliding surfaces, and has an adhesive additive to keep it from running off of the the surfaces to which it is applied. It occured to me that these qualities might make it an excellent lubricant for semi auto pistol slides. I have been...
- Fri Jun 08, 2012 10:10 am
- Forum: Lathes
- Topic: Got my new toy today
- Replies: 22
- Views: 8003
Re: Got my new toy today
Not familiar with them, but would likt to be......Lew Ok! I will shamelessly point you to a post I made a long time ago. http://www.chaski.org/homemachinist/viewtopic.php?f=44&t=4266 If you read it entirely, and follow the instructions that are provided, you will have a full understanding of ho...
- Thu Jun 07, 2012 10:44 pm
- Forum: Lathes
- Topic: Got my new toy today
- Replies: 22
- Views: 8003
Re: Got my new toy today
Mine came with the two piece version. Can you say "soft jaws?" You're spending money unnecessarily for a different chuck, which most likely will still mar parts. Collets will serve you only so far. Soft jaws will take you beyond that range, with virtually the same level of precision. Are ...
- Thu Jun 07, 2012 7:28 pm
- Forum: Lathes
- Topic: Got my new toy today
- Replies: 22
- Views: 8003
Re: Got my new toy today
nipperdog, You commented on your chuck? Mine came with a very nice two piece jaw chuck. I've had mine about 4 years and it has served me well. Not a bad machine for what they sell for. Some of the guys I know made Grizzly change out the chuck because their catalog shows the two piece chuck jaws but...
- Thu Jun 07, 2012 7:22 pm
- Forum: Lathes
- Topic: Got my new toy today
- Replies: 22
- Views: 8003
Re: Got my new toy today
This is like going from a VW to a BMW You mean it does pretty much the same thing, but costs 4 times as much for parts and is significantly harder to work on? :-) Steve Not really, it means I don't have to squat my 66 year old arthritic body down in front of the Logan to adjust the spindle speed in...
- Wed Jun 06, 2012 3:06 pm
- Forum: Lathes
- Topic: Got my new toy today
- Replies: 22
- Views: 8003
Re: Got my new toy today
Finally got her up and running. This is like going from a VW to a BMW everything works just fine, and I'm having a ball making whatnots from my supply of roundstock. I need to order a Bison chuck though, the stock one is kinda rough. Overall I like it. http://i15.photobucket.com/albums/a356/mrriggs/...
- Wed May 30, 2012 4:31 pm
- Forum: Lathes
- Topic: Got my new toy today
- Replies: 22
- Views: 8003
Re: Got my new toy today
Florida, 50mi N/O Tampa. I don't think that it will fit in a flat rate boxneanderman wrote:Where are you located?nipperdog wrote:Really got to find a home for my old Logan as the shop will be tight with both of em and I'm going to need that room for the Mill.
Ed