Search found 213 matches

by toddalin
Tue Apr 09, 2019 5:28 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

Looks like this may be the overall best option and Harbor Freight has the best prices on it: https://www.harborfreight.com/50-lbs-medium-grade-armex-soda-blast-media-65929.html https://www.armex.com/products/maintenance They also make a 220 grit specifially for giving aluminum a satin finish (turbin...
by toddalin
Tue Apr 09, 2019 1:08 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

Thanks.

Any more?
by toddalin
Mon Apr 08, 2019 2:00 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

At this time I am open to suggestions as to what would be the best blast media to use. As I said, the 80 grit (as I was told) seems to coarse. I've seen 150 grit in aluminum oxide as well as glass beads. https://www.amazon.com/Blastite-Aluminum-Oxide-Sandblasting-Abrasive/dp/B01DCO1QCQ/ref=asc_df_B0...
by toddalin
Mon Apr 08, 2019 1:12 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

I use Scotchbrite finishes on bare aluminum routinely on race car parts. One thing that helps keep the finish nice, is to run through through grades (I don't usually bother with gray), and then buff the parts up through the usual buffing wheels and compounds, and the put the pattern back in with a ...
by toddalin
Mon Apr 08, 2019 1:10 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

I tried the tumbler and after 2 hours, you could see that it was having a positive effect in closing up scratches. But this would take at least a day a piece to get significant results and who has a month of days just to clean these up? At 2 hours, you could see the "peens" in the metal. Also, becau...
by toddalin
Sun Apr 07, 2019 3:58 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

Alternator for a <'69 small block Chevy, though they will work on SBCs up to '92. Originally the alternator was attached to the exhaust manifold and there were no bolt holes in the front of the heads. That changed in '69 when accessory bolt holes were put into the heads.
by toddalin
Sat Apr 06, 2019 4:57 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

I was going to try the finer media for blasting, but the cabinet wasn't working. When I noted this to the staff, it didn't matter because they had now loaded both cabinets with coarse media. Figures! Of course I can bring in my own media. But..., I was remined that there is also a small vibratory tu...
by toddalin
Fri Apr 05, 2019 1:17 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

Anodizing is out of the question due to expense. My profit on each of those aluminum pieces is only about $8 with my labor, and anodizing would kill that. I've had some of these sitting in a box for over 4 years and they still look like new. Once mounted, it is up to the user to keep them clean. Or,...
by toddalin
Thu Apr 04, 2019 2:47 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

I tried the blast cabinet. The fine media cabinet wasn't working and I tried the course media. Interesting finish, but rough. Certainly gets rid of the scratches. Will try this one again with fine media. http://headerbracket.com/index.html Very unhappy with this "machinist." All others separated the...
by toddalin
Wed Apr 03, 2019 5:58 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

Re: How to "Clean Up" Satin Finish Aluminum???

I do have access to both course and smooth media cabinets, and this is certainly worth a try. Thanks.

They were not tumbled and everything you see was done on the big CNC mills; first a Fidal, then two different HAAS. I had been to the shops several times.
by toddalin
Wed Apr 03, 2019 2:38 pm
Forum: General Discussion
Topic: How to "Clean Up" Satin Finish Aluminum???
Replies: 20
Views: 879

How to "Clean Up" Satin Finish Aluminum???

I had a machinist make a bunch of aluminum spacers, and he did less than a stellar job on the finish. The fact that he dropped the box (45 pieces), certainly didn't help. It is a brushed satin aluminun, and I believe the finish is obtained using a "scotch brite" tool. This shows one on my website: h...
by toddalin
Sat Feb 23, 2019 2:31 pm
Forum: General Discussion
Topic: GE 44 tonner
Replies: 13
Views: 2106

Re: GE 44 tonner

I think that some people are confusing "scale" with "gauge." This is partially because the way in which the question was worded. Perhaps the OP can clarify which he has in mind.