Search found 23 matches
- Wed Aug 02, 2017 9:08 pm
- Forum: Milling Machines
- Topic: Brown & Sharp #9 er32 options ?
- Replies: 13
- Views: 12550
Re: Brown & Sharp #9 er32 options ?
Got the collet's from lms everything checked out fine. I'm getting under .0005 runout so I'm pretty happy with that . Thanks everyone for the advice.
- Wed Jul 05, 2017 5:28 pm
- Forum: Milling Machines
- Topic: Brown & Sharp #9 er32 options ?
- Replies: 13
- Views: 12550
Re: Brown & Sharp #9 er32 options ?
Well I decided to go with the B&S 9 Collet's. It will be more ridged have less of a chance of tolerance stacking problems and gain me a couple of inches on the z axis . Thanks for the input guys you where both very helpful.
- Tue Jul 04, 2017 5:14 pm
- Forum: Milling Machines
- Topic: Brown & Sharp #9 er32 options ?
- Replies: 13
- Views: 12550
Re: Brown & Sharp #9 er32 options ?
Its for my index 40 mill I probably should have mentioned that . Tolerance stacking is my main concern Im at 2.5" projection from the spindle with the endmill holders I have now with no ill affects . Although less stick out certainly wouldn't be a bad thing . I have narrowed it down to the mt3 ...
- Tue Jul 04, 2017 3:41 pm
- Forum: Milling Machines
- Topic: Brown & Sharp #9 er32 options ?
- Replies: 13
- Views: 12550
Re: Brown & Sharp #9 er32 options ?
The only other option that is some what readily available is a B&S 9 to MT3 adapter then use a MT3 er32 chuck . The only problem I have with this option is that is that the adapter will extend the chuck out a half an inch or so further then the before mentioned option .
- Tue Jul 04, 2017 2:50 pm
- Forum: Milling Machines
- Topic: Brown & Sharp #9 er32 options ?
- Replies: 13
- Views: 12550
Brown & Sharp #9 er32 options ?
Would running a 3/4 straight shank er32 collet chuck in a 3/4 B&S 9 collet have any advantages over just getting a full set of B&S collets ?
- Sat Jun 03, 2017 5:42 pm
- Forum: The Photo Album
- Topic: New addition to the shop Index 40H
- Replies: 3
- Views: 18981
Re: New addition to the shop Index 40H
Thanks for the link a DRO is definitely on the short list .
- Tue May 30, 2017 12:33 am
- Forum: Milling Machines
- Topic: wells index model 40H spindle pulley
- Replies: 6
- Views: 6102
Re: wells index model 40H spindle pulley
No worries man I appreciate the effort at least you tried to help thanks again . as far as the mill is concerned it must have been rebuilt at some point . Most of the hand scraping is still prominent and it is smooth in all axis . Its a very stout machine for its size and I couldn't be happier with ...
- Mon May 29, 2017 9:06 pm
- Forum: Milling Machines
- Topic: wells index model 40H spindle pulley
- Replies: 6
- Views: 6102
Re: wells index model 40H spindle pulley
adding a pic of the mill
- Mon May 29, 2017 9:00 pm
- Forum: The Photo Album
- Topic: New addition to the shop Index 40H
- Replies: 3
- Views: 18981
- Mon May 29, 2017 8:15 pm
- Forum: Milling Machines
- Topic: wells index model 40H spindle pulley
- Replies: 6
- Views: 6102
Re: wells index model 40H spindle pulley
Well I finally got it off its a press fit no set screw or anything . I just used a pulley puller and it and the bearing came off together .
- Tue May 09, 2017 7:51 am
- Forum: Milling Machines
- Topic: wells index model 40H spindle pulley
- Replies: 6
- Views: 6102
Re: wells index model 40H spindle pulley
ok thanks for the info I will see if I can get it apart tonight
- Mon May 08, 2017 8:44 am
- Forum: Milling Machines
- Topic: wells index model 40H spindle pulley
- Replies: 6
- Views: 6102
wells index model 40H spindle pulley
Can't figure out how to remove the spindle drive pulley . It has a couple of chips that I would like to repair .