Search found 3 matches

by rjitreeman0909
Fri Aug 02, 2019 9:46 am
Forum: General Discussion
Topic: Milling procedure confirmation
Replies: 20
Views: 4331

Re: Milling procedure confirmation

If they are simple wedges, no step or shoulder, would an initial bandsaw or cutoff saw operation speed the metal removal and possibly result in two wedges from one raw block?
by rjitreeman0909
Fri Aug 02, 2019 9:28 am
Forum: General Discussion
Topic: Water cooling a 12HP air cooled motor
Replies: 44
Views: 6361

Re: Water cooling a 12HP air cooled motor

Consider adding water tubing formed with 180 turns and each pass spaced as closely as possible to the previous. This will cover approximately 3/4 of the housing. Probably 2 or 3 assemblies with 5/16 or 3/8 diameter tubing paralleled together. In addition as you are working on, push as much air as po...
by rjitreeman0909
Fri Aug 02, 2019 8:35 am
Forum: General Discussion
Topic: Replace v belt question
Replies: 8
Views: 1132

Replace v belt question

My 29 year old ENCO 110-1350 Lathe still has the original B- width belt. Without saying, it has stiffened with age and the overlap at the seam is stiffer than the rest. That stiff area becomes obvious by introducing a irregularity in the otherwise smooth running machine. Machine presently has a 1.5h...