Search found 3 matches
- Fri Aug 02, 2019 9:46 am
- Forum: General Discussion
- Topic: Milling procedure confirmation
- Replies: 20
- Views: 10502
Re: Milling procedure confirmation
If they are simple wedges, no step or shoulder, would an initial bandsaw or cutoff saw operation speed the metal removal and possibly result in two wedges from one raw block?
- Fri Aug 02, 2019 9:28 am
- Forum: General Discussion
- Topic: Water cooling a 12HP air cooled motor
- Replies: 44
- Views: 20240
Re: Water cooling a 12HP air cooled motor
Consider adding water tubing formed with 180 turns and each pass spaced as closely as possible to the previous. This will cover approximately 3/4 of the housing. Probably 2 or 3 assemblies with 5/16 or 3/8 diameter tubing paralleled together. In addition as you are working on, push as much air as po...
- Fri Aug 02, 2019 8:35 am
- Forum: General Discussion
- Topic: Replace v belt question
- Replies: 8
- Views: 5519
Replace v belt question
My 29 year old ENCO 110-1350 Lathe still has the original B- width belt. Without saying, it has stiffened with age and the overlap at the seam is stiffer than the rest. That stiff area becomes obvious by introducing a irregularity in the otherwise smooth running machine. Machine presently has a 1.5h...