Search found 36 matches
- Sat Nov 24, 2007 11:00 am
- Forum: Milling Machines
- Topic: How To Bore Using a Mill by a Total Newb
- Replies: 34
- Views: 11364
seal killer My procedure is to adjust the set screws so there is some resistance to turn the dial. there is no need to lock the the head with the set screws. Just as you would not lock the cross slide on every cut on a lathe. As someone else said loosening and tightening the set screws there is a ch...
- Tue Nov 06, 2007 9:03 pm
- Forum: I.C. Engines
- Topic: Started the Edwards Radial 5 (finally)
- Replies: 2
- Views: 6783
Hi deere_x475guy The cam is looking good, I have a suggestion about the bearings for the cam. The bearings B2 {.375 x .875 x .218} listed in the bill of materials from Boca bearings are 22.00 dollars each. I am going to use .281 wide bearing and c bore cam to same. this size bearing is about 1/3 the...
- Wed Oct 24, 2007 4:00 pm
- Forum: I.C. Engines
- Topic: Edwards 5 Radial Engine
- Replies: 65
- Views: 162758
Hi Bob My Radial has been on hold for the last 3 Months, I have been tooling up and building 4 belt drive reduction units. I hope I can get back to it soon. I will start on the Cam or the rings next. Here's a photo of reduction units, they are for large scale R/C model aircraft. http://img.photobuck...
- Wed Aug 29, 2007 4:50 pm
- Forum: I.C. Engines
- Topic: Belt Drive reduction unit
- Replies: 10
- Views: 13357
Here's some pics. The twin is a 40cc, it was the first engine I designed and built the other one is also 40cc . I had a fire several years ago from an unattened trash fire and burned down my storage barn and lost all os my engines, model boats,car,radio control. These engines were in the house and w...
- Tue Aug 28, 2007 9:35 pm
- Forum: I.C. Engines
- Topic: Belt Drive reduction unit
- Replies: 10
- Views: 13357
- Mon Aug 27, 2007 5:05 pm
- Forum: I.C. Engines
- Topic: Belt Drive reduction unit
- Replies: 10
- Views: 13357
- Sun Aug 26, 2007 7:16 am
- Forum: I.C. Engines
- Topic: Belt Drive reduction unit
- Replies: 10
- Views: 13357
- Sat Aug 25, 2007 1:41 pm
- Forum: I.C. Engines
- Topic: Belt Drive reduction unit
- Replies: 10
- Views: 13357
Belt Drive reduction unit
Hi All
My latest project for friend, He flies 1/4 scale model aircraft and needed a reduction unit to drive a 30" prop., The engine is 62 cc .
Here's the results.
Ivy McNeil
My latest project for friend, He flies 1/4 scale model aircraft and needed a reduction unit to drive a 30" prop., The engine is 62 cc .
Here's the results.
Ivy McNeil
- Tue Jul 03, 2007 5:48 am
- Forum: I.C. Engines
- Topic: Edwards 5 Radial Engine
- Replies: 65
- Views: 162758
- Mon Jul 02, 2007 6:49 pm
- Forum: I.C. Engines
- Topic: Edwards 5 Radial Engine
- Replies: 65
- Views: 162758
- Thu Jun 28, 2007 7:04 am
- Forum: I.C. Engines
- Topic: Edwards 5 Radial Engine
- Replies: 65
- Views: 162758
Hi Paddy Thats a nice looking shop you have. No I did not case harden the crank, I hope I dont regret it later. Your's is looking good also, dont feel bad about scrapping parts, I scraped a set of cylinders because I used some mystery alum. it was gumy and could not cut fins building up on tool and ...
- Wed Jun 27, 2007 8:29 pm
- Forum: I.C. Engines
- Topic: Edwards 5 Radial Engine
- Replies: 65
- Views: 162758