Search found 1198 matches

by Doug_C
Fri Jul 22, 2005 12:44 pm
Forum: General Discussion
Topic: Anybody Know July ENCO Free Shipping code
Replies: 3
Views: 863

Re: Anybody Know July ENCO Free Shipping code

75RNUP

I don't have one of the July flyers on hand. They may also have a special stock number used with the code rather than the standard catalog order number.

DC
by Doug_C
Thu Jul 21, 2005 2:00 pm
Forum: General Discussion
Topic: Rethreading question
Replies: 4
Views: 1238

Re: Rethreading question

Clem, There should be plenty of OD there. The next issue would be over all length to give strength in the step down. If need be, the 1"-8 could be somewhat short. The 33mm will have a minor diameter not less than 1.125"? . That could be easily checked with a pair of calipers to verify the root of th...
by Doug_C
Wed Jul 20, 2005 7:49 pm
Forum: General Discussion
Topic: Band Saw Adjustment
Replies: 3
Views: 973

Re: Band Saw Adjustment

Is this the blade it was shipped with? A portion of blade drift can be due to the teeth on the opposite side of the drift being dulled for whatever reason. Contributing to the point of only cutting toward the sharper side. Even if you get it perfect for this blade. The next blade can and will seek i...
by Doug_C
Mon Jul 18, 2005 12:14 pm
Forum: Live Steam
Topic: propane safety
Replies: 42
Views: 4876

Re: propane safety *DELETED*

Post deleted by Harold_V [img]/ubb/images/graemlins/grin.gif"%20alt="[/img]
by Doug_C
Sun Jul 17, 2005 8:38 pm
Forum: General Discussion
Topic: Which Blade for a band saw
Replies: 6
Views: 1765

Re: Which Blade for a band saw, Best Prices

Here you go Don, The latest free shipping promo-code was listed somewhere here a couple weeks ago. Enco sale I like their misprint of "CARBIDE STEEL BANDSAW BLADE ". I am fairly certain that should be Carbon Steel! There used to be a lot more on eBay a couple years ago when I was looking. I ended up...
by Doug_C
Fri Jul 15, 2005 3:11 pm
Forum: General Discussion
Topic: new to this forum
Replies: 1
Views: 718

Re: new to this forum

Welcome to the board! Since you have some laser cutting exposure. Here was a thread a few weeks ago that asked the question of laser verses water jet cutting. Old thread I have had some exposure to both and each has its place. I would think the cost to be so close as to not make much of a difference...
by Doug_C
Thu Jul 14, 2005 4:35 pm
Forum: Lathes
Topic: Lathe Quick-Change Toolpost
Replies: 2
Views: 1355

Re: Lathe Quick-Change Toolpost

Most 14" lathes will use the 200 series(Phase II) or BXA(Aloris) size sets. The 300 series or CXA tend to be rather large on some 14" lathes. I use the Wedge type Phase II 200 series on my Jet 1440 which will also accept Aloris BXA holders. It is functional, but it isn't an Aloris by any means. Kind...
by Doug_C
Wed Jul 13, 2005 12:32 pm
Forum: Lathes
Topic: 3 jaw chuck - basic question
Replies: 13
Views: 4221

Re: 3 jaw chuck - basic question on Timing

Thanks Kap,

That is news to me. I don't recall ever seeing this type of scroll chuck!

I guess that would make sense if 1,2 and 3 are in sync in the normal installation. Then installing them 3,2, and 1 in the reverse direction should put things back in order.

DC
by Doug_C
Wed Jul 13, 2005 12:08 am
Forum: General Discussion
Topic: Keeping with the theme
Replies: 8
Views: 2313

Re: Keeping with the theme *Complete*

Well here is the finished project in its completed form. I made the die and had the trays Thermoformed and CNC'd them on my mill to allow access if any future work needs done. Nice to still have contacts in past occupations. DC http://www.chaski-test.com/pictures/69619-DoorAssyFinish1.jpg http://www...
by Doug_C
Tue Jul 12, 2005 4:51 pm
Forum: Lathes
Topic: 3 jaw chuck - basic question
Replies: 13
Views: 4221

Re: 3 jaw chuck - basic question on Timing

This must be a 2 piece, top removable jaw and not solid type. You cannot reverse the solid type. There would be another set for gripping large OD parts if that were the case. If these are hardened top jaws, you should keep the jaw number with the original mating master jaw. If it does not grip on ce...
by Doug_C
Fri Jul 08, 2005 10:17 am
Forum: General Discussion
Topic: DC motor controller........no control........help
Replies: 11
Views: 2680

Re: DC motor controller........no control........h

Heavy Groomer ?.......


That don't sound like the HG I know!

Personal Hygene is important, but I just can't see him saying "Mirror, mirror on the wall".........[img]/ubb/images/graemlins/grin.gif"%20alt="[/img]LOL! [img]/ubb/images/graemlins/grin.gif"%20alt="[/img]

DC