Search found 52 matches
- Wed Aug 27, 2003 8:21 am
- Forum: Lathes
- Topic: Hendey Lathe Thyratron tube
- Replies: 8
- Views: 6286
Re: Hendey Lathe Thyratron tube
As already noted above, the thyratron topic is well covered on the PracticalMachinist Monarch EE forum. PMMonarch Driect Link Try a search on "tubes" Here is a direct link to a post about an alternative tube that seems to work in a 3hp application. PM post about Cheap Thyratron Alternative...
- Fri Jul 04, 2003 9:10 pm
- Forum: General Discussion
- Topic: What do you do in your shop?
- Replies: 45
- Views: 13738
Re: What do you do in your shop?
I have fun!
- Thu Jul 03, 2003 1:50 pm
- Forum: General Discussion
- Topic: What do you do in your shop?
- Replies: 45
- Views: 13738
- Wed Jun 18, 2003 3:26 pm
- Forum: The Photo Album
- Topic: Need Help!
- Replies: 5
- Views: 3725
Re: Need Help!
I'm pretty sure you can use MS Photoeditor, an MS Office tool) to resize photos. If you have Office you proabably have Photoeditor. Open up a picture in photoeditor and then look under help for how to save an image. The setting the photo quality in the lower range should reudce the file size.
- Mon Jun 16, 2003 8:57 pm
- Forum: General Discussion
- Topic: Shop Projects
- Replies: 2
- Views: 2089
Shop Projects
Just stumbled onto this site while googling some lathe related items. A bunch of scanned older articles on stuff to make.
Shop Projects
Shop Projects
- Wed Jun 11, 2003 8:30 pm
- Forum: Lathes
- Topic: Buck 6 Jaw Chuck
- Replies: 15
- Views: 7526
Re: Buck 6 Jaw Chuck
They're in the MSC catalog. Not cheap. Here: http://www.mscdirect.com/PDF.process?pdf=1542 Actually, I looked again and they don't seem to have 5" diameter plates. 6" is the smallest. The back plate is relatively simple as far as the side that mates with the Buck Chuck is concerned. Just a...
- Tue Jun 10, 2003 8:33 pm
- Forum: General Discussion
- Topic: Atlas Shaper Legs
- Replies: 4
- Views: 2640
Re: Atlas Shaper Legs
The shapers used cast legs which appear to have been the same as the ones for the lathe. The lefthand leg for the lathes had a boss for the motor mount so I suppose the shapers may have used two rigthhand legs.
- Thu May 29, 2003 7:53 am
- Forum: General Discussion
- Topic: Plow Bolts??
- Replies: 6
- Views: 4098
- Wed May 28, 2003 6:51 pm
- Forum: General Discussion
- Topic: Plow Bolts??
- Replies: 6
- Views: 4098
Re: Plow Bolts??
When I worked in a (a real) hardware store 25 years ago we called them plow bolts too. The place had grimey busted boxes of them spilling on the floor. Never sold a single one in the year I worked there. Probably went out with the trash when the place finally went out of business 5 years ago. Too ba...
- Thu May 22, 2003 7:36 pm
- Forum: Lathes
- Topic: powermatic lathe question
- Replies: 1
- Views: 1930
Re: powermatic lathe question
I believe Powermatic bought Logan late in the game.
- Tue May 20, 2003 7:12 pm
- Forum: General Discussion
- Topic: Thread Dial + photos
- Replies: 17
- Views: 6339
Zero is Even (Most of the Time)
Look under "Subtraction and the Rest of the Integers" at the following link:
http://www.andrews.edu/~calkins/math/we ... 2.htm#NATU
For the most of the time exception(s) look here:
http://www.straightdope.com/mailbag/mzeroeven.html
http://www.andrews.edu/~calkins/math/we ... 2.htm#NATU
For the most of the time exception(s) look here:
http://www.straightdope.com/mailbag/mzeroeven.html
- Fri May 02, 2003 12:46 pm
- Forum: General Discussion
- Topic: Jacobs model 50 ruberflex chuck info needed
- Replies: 2
- Views: 1356
Re: Jacobs model 50 ruberflex chuck info needed
Pete,
I've got a model 50 and I've got the manual for it. I've already sent copies to 2 other users of this board. I'd be happy to send you a copy. Contact me by email at: billsct@comcast.net
I've got a model 50 and I've got the manual for it. I've already sent copies to 2 other users of this board. I'd be happy to send you a copy. Contact me by email at: billsct@comcast.net