Well I ended up removing armature and turned it down for a 209 bearing,
Thanks Randall
Search found 113 matches
- Sun Feb 14, 2021 9:01 pm
- Forum: General Discussion
- Topic: 15kw gen bearing problem
- Replies: 11
- Views: 5979
- Sun Feb 07, 2021 9:58 am
- Forum: General Discussion
- Topic: 15kw gen bearing problem
- Replies: 11
- Views: 5979
Re: 15kw gen bearing problem
The engine I'm using are on generators, don't think there's a problem with using,
- Sat Feb 06, 2021 11:11 pm
- Forum: General Discussion
- Topic: 15kw gen bearing problem
- Replies: 11
- Views: 5979
Re: 15kw gen bearing problem
Back side of housing is 3.075 rough bored.
- Sat Feb 06, 2021 11:02 pm
- Forum: General Discussion
- Topic: 15kw gen bearing problem
- Replies: 11
- Views: 5979
15kw gen bearing problem
I have a 15 kw tractor pto run gen. I am converting to a two cyl, diesel engine, the generator had a gear box so the 540 pto would run it at 1800 rpm, the gearbox I removed held the bearing that supported the armature, so now I have to install a bearing in the housing, the problem is shaft where brg...
- Thu Feb 14, 2019 7:54 pm
- Forum: Gunsmithing
- Topic: cutting a dovetail
- Replies: 2
- Views: 14210
Re: cutting a dovetail
thanks
- Wed Feb 13, 2019 10:36 pm
- Forum: Gunsmithing
- Topic: cutting a dovetail
- Replies: 2
- Views: 14210
cutting a dovetail
when cutting a dovetail for a ft.sight do you use a smaller dovetail cutterand sneak up on it or are the cutters made for the sights being cut for?
- Wed Feb 13, 2019 9:18 pm
- Forum: Gunsmithing
- Topic: 36 cal muzzel loader
- Replies: 0
- Views: 13317
36 cal muzzel loader
I have a barrel I want to make shorter,it has a 9/16 thread breech plug now but I want to make it 5/8 to use on a Thompson,has anyone did this?
- Wed Feb 21, 2018 6:31 pm
- Forum: General Discussion
- Topic: Hss for cast iron
- Replies: 3
- Views: 2415
Re: Hss for cast iron
slowed the feed and put radius on tool and got a dood finish,thanks
- Mon Feb 19, 2018 10:11 pm
- Forum: General Discussion
- Topic: Hss for cast iron
- Replies: 3
- Views: 2415
Hss for cast iron
Hey fellows cutting down a back plate to mount four jaw chuck to my heavy 10,having a hard time getting a good finish ,hows the best way or shape to grind tool?
Thanks
Thanks
- Tue Feb 06, 2018 7:02 am
- Forum: General Discussion
- Topic: 10" southbend
- Replies: 4
- Views: 2493
Re: 10" southbend
Thanks guys,just ordered one!
- Mon Feb 05, 2018 6:48 pm
- Forum: General Discussion
- Topic: 10" southbend
- Replies: 4
- Views: 2493
10" southbend
He fellows,I have a Southbend 10 with 2 1/4 -8 spindle thread,I bought a 4jaw chuck from a friend with 1 1/2 dia. thread,my question is should I try to bore and thread or buy a back plate with right thread?
Thanks Randall
Thanks Randall
- Sat May 27, 2017 4:49 pm
- Forum: General Discussion
- Topic: hyd cyl piston
- Replies: 2
- Views: 2190
Re: hyd cyl piston
Thanks