Search found 2267 matches
- Fri Apr 13, 2007 2:16 pm
- Forum: General Discussion
- Topic: Drill press problems
- Replies: 34
- Views: 10765
drill press problems
Mike, I'll get the paperwork out and check the belt settings for rpms. Yeah, table deflexion, other than the obvious tearing up of a "decent" drill press , is the other main reason I have decided not to even attempt milling on the drill press. There just is no way to prevent the table from...
- Fri Apr 13, 2007 8:34 am
- Forum: General Discussion
- Topic: Drill press problems
- Replies: 34
- Views: 10765
drill press problems
Mike, I got absolultely no trouble shooting done last night. Tonight for sure. I began to notice problems trying to drill 3/8" holes in the 2" channel. The last bit I smoked was a 1/8". I do not know what rpm. That may be another problem as well. I would assume now that the subject ha...
- Thu Apr 12, 2007 1:00 pm
- Forum: Live Steam
- Topic: steel rail
- Replies: 0
- Views: 921
- Thu Apr 12, 2007 9:02 am
- Forum: General Discussion
- Topic: Drill press problems
- Replies: 34
- Views: 10765
drill press problems
Hmmm, Sounds like three problems or perhaps a combination of.... I have fried four bits so far. Three of them I bought in a set from HF. One 1/8" bit was one bought separately. The HF bits are brass colored on the end, and I suspect were not the top of the line jobs because of price. Maybe a le...
- Wed Apr 11, 2007 8:25 am
- Forum: General Discussion
- Topic: Drill press problems
- Replies: 34
- Views: 10765
Drill press problems
I have a Tractor Supply drill press that is giving me fits. When I first bought it I gave some thought to doign some light milling, but figured I'd trash it so never did. In the meantime it has served well doing light drilling. A while back I was attempting to drill holes in 2" channel. I have ...
- Wed Apr 04, 2007 3:25 pm
- Forum: Live Steam
- Topic: silver soldering
- Replies: 4
- Views: 1631
silver soldering
Presently car ladders, small boxes, loco fittings, etc. Eventually frame parts, etcetera for a ten wheeler.
Brian
Brian
- Wed Apr 04, 2007 3:22 pm
- Forum: Live Steam
- Topic: Passenger car truck castings
- Replies: 0
- Views: 877
Passenger car truck castings
Pinging Jack Owens or someone who knows him.
I'm looking for drawings for some heavyweight six-wheel passenger car trucks that Jack cast in aluminum for a bud a while back. The castings are in hand, but no drawings.
Brian
I'm looking for drawings for some heavyweight six-wheel passenger car trucks that Jack cast in aluminum for a bud a while back. The castings are in hand, but no drawings.
Brian
- Wed Apr 04, 2007 9:52 am
- Forum: Live Steam
- Topic: Cast Box Car Ends
- Replies: 2
- Views: 1851
Cast box car ends
Chris, I am currently shopping a 1980's vintage boxcar for the C&IG that is built entirely of wood except the center beam. The ends are plywood, and an enterprising individual split round stock of the correct diameter, then shaped the ends on a belt sander or similar, and attached to the ends to...
- Wed Apr 04, 2007 8:52 am
- Forum: Live Steam
- Topic: Wheel update
- Replies: 7
- Views: 2567
wheels
Okay, stupid question(s).
Starting out one chucks the thing into the three or four jaw and machines the back flat, turns it around and faces to correct thickness then bores a hole for the arbor, and everything else is done on an arbor, right?
Thanks,
Brian
Starting out one chucks the thing into the three or four jaw and machines the back flat, turns it around and faces to correct thickness then bores a hole for the arbor, and everything else is done on an arbor, right?
Thanks,
Brian
- Wed Apr 04, 2007 8:48 am
- Forum: Live Steam
- Topic: silver soldering
- Replies: 4
- Views: 1631
silver soldering
Having failed miserably trying to to a little silver soldering with one of those itsy butane pencil type torches I have been in the market for an acetylene kit. Figured a guy needs a cutting torch anyhoo..... I recently replaced a water heater and a bud had one of those ends that screws onto the but...
- Wed Apr 04, 2007 8:41 am
- Forum: Live Steam
- Topic: On Display and Running
- Replies: 15
- Views: 6859
Turbo generators
Now,
These are for sale as well?
These are for sale as well?
- Mon Apr 02, 2007 1:58 pm
- Forum: Live Steam
- Topic: Connie Miracle
- Replies: 6
- Views: 3681
Connie Miracle
Hey Guys,
I cannot get the website to come up.
Also, the above replies do no have any address or phone numbers.
I am to gather that she will no longer have a website?
Bummer.
Brian
I cannot get the website to come up.
Also, the above replies do no have any address or phone numbers.
I am to gather that she will no longer have a website?
Bummer.
Brian