Built the 2x10 ramp first,with a 2x4 stop at the bottom. Used a come-along as a holdback and slowly notched the largest parts down the ramp.
Had the engine crane waiting at the bottom to position them.
Search found 79 matches
- Tue Jan 29, 2013 8:31 am
- Forum: Milling Machines
- Topic: How Would You Dismantle a VN #12 to Move into the Basement?
- Replies: 79
- Views: 22388
- Tue Jan 29, 2013 8:29 am
- Forum: Milling Machines
- Topic: How Would You Dismantle a VN #12 to Move into the Basement?
- Replies: 79
- Views: 22388
- Tue Jan 29, 2013 8:27 am
- Forum: Milling Machines
- Topic: How Would You Dismantle a VN #12 to Move into the Basement?
- Replies: 79
- Views: 22388
Re: How Would You Dismantle a VN #12 to Move into the Baseme
spro wrote:Two years flew by, Nelson. Your adventure in doing this will certainly be of interest to many here. congrat's !!!
i guess that's another way of saying pics are cool ..
The whole thing is down the basement.
- Tue Jan 29, 2013 3:06 am
- Forum: Milling Machines
- Topic: How Would You Dismantle a VN #12 to Move into the Basement?
- Replies: 79
- Views: 22388
Re: How Would You Dismantle a VN #12 to Move into the Baseme
This is going good Nels. I think your approaches have been sound. the deal with the screw and gib was different but who knows about the knee. This info you/ we share may be useful to somebody else. I'm going to tell you to have some hoist around that knee and it will go easier. It doesn't have to b...
- Sun Jan 20, 2013 3:54 am
- Forum: General Discussion
- Topic: Recently Joined
- Replies: 17
- Views: 4742
Re: Recently Joined
Nice big shop Revrnd, wish I had the land to build something like that.
- Sun Nov 18, 2012 4:14 pm
- Forum: General Discussion
- Topic: Installing Albrecht 1/16" chuck on Dumore Sensitive DP
- Replies: 4
- Views: 2195
Re: Installing Albrecht 1/16" chuck on Dumore Sensitive DP
Ok, thanks John. I will remove the sensitive feed assembly and just use the small Albrecht. Was hoping to also use the finger feed as a quill, rather than raising and lowering the table. Both the spindle and finger feed are male, so I didn't think there was a way to do it. Just wanted to check and b...
- Sun Nov 18, 2012 1:50 pm
- Forum: General Discussion
- Topic: Installing Albrecht 1/16" chuck on Dumore Sensitive DP
- Replies: 4
- Views: 2195
Installing Albrecht 1/16" chuck on Dumore Sensitive DP
Purchased one of those mini Dumore Sensitive Drill Presses for doing clock work. Had a tough time getting the original Jacobs 0 chuck off, but got it. http://www.hobby-machinist.com/attachment.php?attachmentid=42486&d=1353195713 http://www.hobby-machinist.com/attachment.php?attachmentid=42487&am...