Search found 62 matches
- Tue May 03, 2016 10:54 am
- Forum: Live Steam
- Topic: SMOKEBOX THROTTLE
- Replies: 11
- Views: 5123
Re: SMOKEBOX THROTTLE
Well I located the article on the 4 aces smoke box throttle. No mention of the American Throttle Company, and true to form no dimensions of the valve assembly that Roy Johnston built for his model. I wonder if any drawings exist from Johnston's loco build project. A check of the internet does not tu...
- Wed Apr 20, 2016 12:05 pm
- Forum: Live Steam
- Topic: SMOKEBOX THROTTLE
- Replies: 11
- Views: 5123
Re: SMOKEBOX THROTTLE
Thanx.
By the way I found some drawings from The American Throttle Co. on the Norfolk and western website (https://www.nwhs.org/index.php)
By the way I found some drawings from The American Throttle Co. on the Norfolk and western website (https://www.nwhs.org/index.php)
- Mon Apr 11, 2016 3:08 pm
- Forum: Live Steam
- Topic: SMOKEBOX THROTTLE
- Replies: 11
- Views: 5123
Re: SMOKEBOX HROTTLE
Hello "steamingon", I have already looked thru these references (on the internet) before bothering anyone else. A search for throttle, or Roy Johnson's Four Ace's in these referenced sources has not been successful So if any of "you all" know the specific issues of Model Tec then...
- Mon Apr 11, 2016 2:58 pm
- Forum: Live Steam
- Topic: NYC Hudson Major Appliance Manufacturer's
- Replies: 14
- Views: 6005
Re: NYC Hudson Major Appliance Manufacturer's
Hello John Unfortunately neither of these patents (1801441 and 1753297) pertain to the multi-poppet, multi-port throttle. The poppet valves are operated in sequence as a cam shaft is rotated by the throttle lever system extending back to the cab, I have the illustrations from the American Throttle c...
- Sat Apr 09, 2016 10:28 pm
- Forum: Live Steam
- Topic: NYC Hudson Major Appliance Manufacturer's
- Replies: 14
- Views: 6005
Re: NYC Hudson Major Appliance Manufacturer's
HELLO OUT THERE. Does anyone have an instruction manual or drawings for the throttle valves made by the American throttle company, New York, N.Y. ! These were a multi-port poppet valve arranged to open sequentially larger poppet valves as the cam lever shaft was rotated. The tell tale is a shaft mou...
- Fri Apr 08, 2016 9:45 pm
- Forum: Live Steam
- Topic: SMOKEBOX THROTTLE
- Replies: 11
- Views: 5123
Re: SMOKEBOX HROTTLE
How would one go about doing that. The magazine is long gone.
- Fri Apr 08, 2016 8:09 pm
- Forum: Live Steam
- Topic: SMOKEBOX THROTTLE
- Replies: 11
- Views: 5123
SMOKEBOX THROTTLE
I am looking for information on the multi-port, poppet valve throttle original made by the American throttle company.
These were used in the smoke box of superheated locomotives like the Berkshire and the 4-8-4.
Perhaps someone out there can direct me to a source.
An internet search turns up nothing.
These were used in the smoke box of superheated locomotives like the Berkshire and the 4-8-4.
Perhaps someone out there can direct me to a source.
An internet search turns up nothing.
- Sun Jun 21, 2015 6:31 pm
- Forum: Live Steam
- Topic: Locomotive Beds
- Replies: 36
- Views: 18965
Re: Locomotive Beds
Hello again, I have it on good authority from a person I know that he saw a large collection of GCS drawings in cabinets at the St. Louis Museum of Transport. Anyone live in St. Louis? Perhaps they can check into this. I will try a phone call this week and see if I can get anywhere. It would make se...
- Thu Jun 18, 2015 2:08 pm
- Forum: Live Steam
- Topic: Locomotive Beds
- Replies: 36
- Views: 18965
Re: Locomotive Beds
For quite some time now I have been looking for the whereabouts of the drawings from the former General Steel Casting company. Just this week I made inquiries at the Columbus Castings company which was reputed to have these documents. The manger of their service department was good enough to check w...
- Fri Feb 28, 2014 4:28 pm
- Forum: Live Steam Marketplace
- Topic: WTB Lucky Seven Drawings
- Replies: 6
- Views: 2439
Re: WTB Lucky Seven Drawings
Check out plan-ahead-designs.com Bridgeton and Harrison no. 7
Plan - Ahead - Designs
CAD Drawing Sets 7-1/4" and 7-1/2" gauge
BH7 Bridgton & Harrison #7
Plan - Ahead - Designs
CAD Drawing Sets 7-1/4" and 7-1/2" gauge
BH7 Bridgton & Harrison #7
- Fri Jan 31, 2014 2:02 pm
- Forum: Live Steam
- Topic: BERKSHIRE DRAWINGS
- Replies: 5
- Views: 2277
Re: BERKSHIRE DRAWINGS
Have you a way to contact Jim Kreider?
- Thu Jan 30, 2014 10:39 pm
- Forum: Live Steam
- Topic: BERKSHIRE DRAWINGS
- Replies: 5
- Views: 2277
BERKSHIRE DRAWINGS
Hello all, Perhaps someone knows where I can find a copy of the Berkshire locomotive bed drawings: locomotive bed 46-11-278 and cylinder detail 31-11-24. I have information that someone has these originals and has loaned them out for microfilming at one time. Trouble it the drawings are very large s...