Gatling Gun

Topical Discussions include anything pertaining to Gunsmithing.

Moderators: Harold_V, JackF, GeorgeGaskill

Harold_V
Posts: 16439
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Gatling Gun

Post by Harold_V » Sat Sep 17, 2016 3:14 am

If you can describe in detail the problem you have, I may be able to suggest a method that will yield the desired results.

Harold
Wise people talk because they have something to say. Fools talk because they have to say something.

homebrew .357
Posts: 208
Joined: Thu Aug 11, 2011 2:32 am

Re: Gatling Gun

Post by homebrew .357 » Wed Nov 09, 2016 1:43 am

Hell, !!, you can't give up yet , old Custer is waiting for it. Hmmmm, I can do 45-70 barrels, mite take me a few years for eight, but just think of it when I turn up at the annual black powder cannon shoot with it, while there`s bullets in the air there`s hope. Homebrew.357.

Geezer
Posts: 5
Joined: Wed Dec 13, 2017 7:14 pm

Re: Gatling Gun

Post by Geezer » Wed Dec 13, 2017 8:22 pm

solek wrote:Hit another rock! You have 10 barrels/bolts, that you have to set head space on. To get it right you have to get the barrel to bolt set +/- about .0005". I have the go/no-go gauges, but get my skills, to the point, to cut the bolts/barrels, right, is lacking! The rest of the parts, work well!
Gun looks good, but it is not a shooter, yet. Someday?
Solek

I have a few years experience with the RG-G
If you would like any help send me a message
It’s only a hobby

Geezer
Posts: 5
Joined: Wed Dec 13, 2017 7:14 pm

Re: Gatling Gun

Post by Geezer » Fri Dec 15, 2017 11:51 am

This is a RG-G inspired build with 6 barrels.
First test firing.
A little less work and money, but still lots of fun.


https://www.youtube.com/watch?v=dt_nHaUohuY

Geezer
Posts: 5
Joined: Wed Dec 13, 2017 7:14 pm

Re: Gatling Gun

Post by Geezer » Sat Dec 16, 2017 11:15 am

Just another RG-G with a new Look

https://www.youtube.com/watch?v=kfdjYp6i60s

Post Reply