Stevens Crack Shot

Topical Discussions include anything pertaining to Gunsmithing.

Moderators: Harold_V, JackF, GeorgeGaskill

Post Reply
qwhit
Posts: 10
Joined: Thu Jul 14, 2011 8:37 pm
Location: Springfield, Ohio

Stevens Crack Shot

Post by qwhit » Mon Jan 18, 2016 1:54 pm

I am looking for any info on the Stevens Crack Shot 22 lr. I am trying to restore the gun and am having trouble finding pictures or schematics on the web.
Can someone point me in the right direction? I need info on the rolling block and side lever to mfg. these parts from scratch.

Thanks
Qwhit

thessler
Posts: 15
Joined: Mon Dec 28, 2015 10:10 am

Re: Stevens Crack Shot

Post by thessler » Mon Jan 18, 2016 3:54 pm

Just Google the model, and on the top of the resulting page hit the Image tab.
You will see a ton of pictures for it. I tried it it works for the crackshot.
Tom

qwhit
Posts: 10
Joined: Thu Jul 14, 2011 8:37 pm
Location: Springfield, Ohio

Re: Stevens Crack Shot

Post by qwhit » Mon Jan 18, 2016 5:14 pm

I have tried that and didn't get the results I wanted. I need a close-up of the parts. I have most of the images off of the web including the Patten Office drawings.

Thanks for the effort.

Qwhit

Steve S
Posts: 101
Joined: Fri Oct 05, 2007 4:22 pm
Location: southcentral - PA

Re: Stevens Crack Shot

Post by Steve S » Tue Jan 19, 2016 4:59 pm


Big Rack
Posts: 21
Joined: Sat Jan 11, 2014 12:55 pm

Re: Stevens Crack Shot

Post by Big Rack » Fri Jan 22, 2016 1:20 pm

Check with Wisner's Gun Parts a Google search will find them. they make obsolete parts for these.

bikerboy
Posts: 1
Joined: Fri Oct 11, 2019 6:57 am

Re: Stevens Crack Shot

Post by bikerboy » Sun Oct 13, 2019 7:55 am

Does anyone know of a site that posts prints for any of the Stevens models, but specifically the falling block models?

JackF
Posts: 1558
Joined: Mon Jan 26, 2009 3:56 pm
Location: Caldwell, Idaho

Re: Stevens Crack Shot

Post by JackF » Mon Oct 14, 2019 12:14 pm

I have't found any prints for my Favorite for the making of missing parts so I ended up buying some of the needed parts from a local collector and then found a complete Favorite at a local auction and was the high bidder. Now I have it for the remainder of the missing parts. I have had the auction gun for over a year but still have't completed this missing parts. :roll: :wink: Seems there is always something higher on the to do list. :( :wink: :lol:


Jack.

Post Reply