FI Regent 22 cal revolver

Topical Discussions include anything pertaining to Gunsmithing.

Moderators: Harold_V, JackF, GeorgeGaskill

Post Reply
earlgo
Posts: 1304
Joined: Sat Jan 29, 2011 11:38 am
Location: NE Ohio

FI Regent 22 cal revolver

Post by earlgo » Thu May 10, 2018 1:09 pm

Does anyone know if there are variations of this Regent model? The one I have has a parts list with it that shows a firing pin retraction spring, but there is no spring in the gun, nor any room for it, nor is there a spring stop recess in the FP channel. Numerich Arms, i.e. Gun Parts Corp. shows a similar parts list but shows the spring as unavailable. Of course a lot of other parts are unavailable also, so I don't know if they don't have any or whether there never was one.
There is an hour long Utube video of someone putting one of these together and he claims to install a spring, but the video is extremely unclear on details.
Any help would be appreciated.
--earlgo
Before you do anything, you must do something else first. - Washington's principle.

Post Reply