Registration in order to post

Sheet Metal Fabrication techniques, questions and help. "Tricks of the Trade"

Moderators: GlennW, Harold_V

Post Reply
User avatar
Harold_V
Posts: 20248
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Registration in order to post

Post by Harold_V »

We've not required registration in order to post, but the select inconsiderate few that have chosen to spam us have now prompted a consideration of the requirement to help control the content of the board. Marty has suggested July 1st. as the date of change, so please consider joining us as a registered user if you aren't now.

For various reasons, a few individuals have had ongoing difficulties with registration. Marty has promised to be of assistance in working out the problems, so, for those of you that require assistance, please post your problems on the Site Software Questions and Answers forum, or you can contact Marty directly if you so desire. In order for him to assist you properly, please provide the necessary information: Username, your Web Browser version, and operating system.

Sorry for the inconvenience. We're in hopes that we don't lose those of you that have contributed so nicely in the past.

Harold
Last edited by Harold_V on Sun Oct 01, 2006 10:54 pm, edited 1 time in total.
User avatar
oldgoaly
Posts: 124
Joined: Tue Feb 04, 2003 10:57 pm
Location: shiloh,illinois usa

Post by oldgoaly »

Harold,
it is worth the effort to keep the spammers at bay!
Take care
tt
clueless near st.louis
Post Reply