Compound curves with an arbor press - new?

Sheet Metal Fabrication techniques, questions and help. "Tricks of the Trade"

Moderators: Harold_V, GlennW

Bruce
Posts: 197
Joined: Wed Aug 08, 2007 12:30 am
Location: Los Angeles, CA

Re: Compound curves with an arbor press - new?

Post by Bruce » Fri Jan 20, 2012 4:06 pm

Thanks, that's great site!

User avatar
oldgoaly
Posts: 124
Joined: Tue Feb 04, 2003 10:57 pm
Location: shiloh,illinois usa

Re: Compound curves with an arbor press - new?

Post by oldgoaly » Sat Feb 25, 2012 3:11 pm

Jerry is a great guy! if you have a question or a problem Jerry will take care of you. from metalmeet
http://www.metalmeet.com/forum/showthread.php?t=9494
Bob lives near Effingham, Il. he does demos at various events one of them is in Oblong, Il. in October.
http://www.metalmeet.com/forum/forumdisplay.php?f=63
here is another thread from mm.
http://www.metalmeet.com/forum/showthread.php?t=9636
clueless near st.louis

Post Reply