I bought a small lot of 2 inch dia sanding discs. Please have a look at the disc in the link. I have never seen a mandrel that would fit this disc. I presume the mandrel consists of a short piece of 3mm/.125 dia rod welded perpendicular to the mandrel shaft.
http://i290.photobucket.com/albums/ll27 ... AG0641.jpg
I figured that I would ask (and try to buy a mandrel) before taking the time to build a mandrel.
anybody recognise this mandrel style
Re: anybody recognise this mandrel style
Hello aribert,aribert wrote:I bought a small lot of 2 inch dia sanding discs. Please have a look at the disc in the link. I have never seen a mandrel that would fit this disc. I presume the mandrel consists of a short piece of 3mm/.125 dia rod welded perpendicular to the mandrel shaft.
http://i290.photobucket.com/albums/ll27 ... AG0641.jpg
I figured that I would ask (and try to buy a mandrel) before taking the time to build a mandrel.
How about one of these as is, or slightly modified.
http://www.grainger.com/Grainger/DEWALT ... Pid=search
http://www.grainger.com/Grainger/DEWALT ... Pid=search
Ken.
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.
Re: anybody recognise this mandrel style
ken572
Thanks - I followed the link and then using the Dewalt nomenclature I was able to find a picture of the sanding discs intended for the mandrel shown in your link (and the discs look the same as mine).
Thanks - I followed the link and then using the Dewalt nomenclature I was able to find a picture of the sanding discs intended for the mandrel shown in your link (and the discs look the same as mine).