titanium sheet

Sheet Metal Fabrication techniques, questions and help. "Tricks of the Trade"

Moderators: Harold_V, GlennW

Post Reply
wally318
Posts: 86
Joined: Sun Jun 05, 2011 1:06 am
Location: Kelowna, British Columbia

titanium sheet

Post by wally318 » Sun Dec 16, 2012 10:59 pm

Anyone here work with titanium sheet?
Looking to find some strips of .050" 3-2.5 or 6-4.
Anyone have some bits of this lying around, or point me
to a source where I can get a small quantity. Thanks.

theg8nw
Posts: 70
Joined: Fri Oct 29, 2010 4:34 am

Re: titanium sheet

Post by theg8nw » Sun Dec 16, 2012 11:37 pm

Have you tried McMaster-Carr, I know they carry it but it looks like no 0.050 . Here there page. http://www.mcmaster.com/#standard-titan ... ts/=kmjiei

Or metalsonline http://www.onlinemetals.com/merchant.cf ... p_cat=1353 has it in 0.050

good luck..

John
Plan your work, work your plan..

redneckalbertan
Posts: 1275
Joined: Thu Nov 01, 2012 10:39 am
Location: South Central Alberta

Re: titanium sheet

Post by redneckalbertan » Mon Dec 17, 2012 8:45 pm

Save all your filings from that stuff!

Post Reply