The Home Machinist!

Anyone here work with titanium sheet?
Looking to find some strips of .050" 3-2.5 or 6-4.
Anyone have some bits of this lying around, or point me
to a source where I can get a small quantity. Thanks.

Have you tried McMaster-Carr, I know they carry it but it looks like no 0.050 . Here there page. http://www.mcmaster.com/#standard-titan ... ts/=kmjiei

Or metalsonline http://www.onlinemetals.com/merchant.cf ... p_cat=1353 has it in 0.050

good luck..

John

Save all your filings from that stuff!