Value of Sheet metal machines (Southwest)
Posted: Thu Nov 07, 2013 1:33 pm
I purchased the tools from a an Estate. Unfortunately for me, I don't have room for them for another 3 or so years when I can build my new shop....I can't find much on them, I am in the Phoenix area. I know depending on where one is located, it could make a difference on value.
What I have
Pexto 137L shear with backgage
DiAcro 24" box/pan (finger) brake
Pexto Combination roll. I believe it to be a Model 622, comes with the benchtop clamp mount and about 6 sets of dies and all the bits when it was new.
I believe this gentleman purchased these items new and they still look to be near new or in otherwise excellent condition.
I am trying to establish a fair market value on them. So, I am hoping those in the know can make some suggestions. I did look at completed items on Ebay, found a few on the shear and the roll, but ironically, not much on the 24" finger brake.
Thanks in advance.
Marty
What I have
Pexto 137L shear with backgage
DiAcro 24" box/pan (finger) brake
Pexto Combination roll. I believe it to be a Model 622, comes with the benchtop clamp mount and about 6 sets of dies and all the bits when it was new.
I believe this gentleman purchased these items new and they still look to be near new or in otherwise excellent condition.
I am trying to establish a fair market value on them. So, I am hoping those in the know can make some suggestions. I did look at completed items on Ebay, found a few on the shear and the roll, but ironically, not much on the 24" finger brake.
Thanks in advance.
Marty