Hi all,
I searched around the site and did not find info on the making a furnace capable of melting aluminum, bronze and iron. But then I didn't go through all 532 pages of hits either.
I am aware of the Gingery books and am about to buy them. I do see a lot of different furnaces out there using a Google search. Gets confusing fast. I guess there are 6000 ways of accomplishing the end goal.
Anyone have a good "cookbook" for a newbie to follow without getting distracted by all the possibilities?
Thanks
Dale Grice
Newbie Furnace build
Moderator: Harold_V
-
- Posts: 84
- Joined: Thu May 26, 2011 2:53 pm
- Location: Stone Mountain, GA
Newbie Furnace build
Projects:
1.6 CB&Q O1a Mikado
1.6 CB&Q NE7 Waycar
RR Supply 90 ton Logging Mikado
1.6 CB&Q O1a Mikado
1.6 CB&Q NE7 Waycar
RR Supply 90 ton Logging Mikado
Re: Newbie Furnace build
Dale, here we do a lot with castings and not so much with furnace building, where you want to go is Alloy Avenue:
http://www.alloyavenue.com/vb/forum.php
They have all kinds of people working on all types of furnaces, I have been a member before they changed their name.
That site is sort of the "Wild West" of metal casting, some of those things they propose or are doing could get a person killed.
http://www.alloyavenue.com/vb/forum.php
They have all kinds of people working on all types of furnaces, I have been a member before they changed their name.
That site is sort of the "Wild West" of metal casting, some of those things they propose or are doing could get a person killed.
-
- Posts: 84
- Joined: Thu May 26, 2011 2:53 pm
- Location: Stone Mountain, GA
Re: Newbie Furnace build
Thanks for that. I have been there before and forgotten about it.
Dale
Dale
Projects:
1.6 CB&Q O1a Mikado
1.6 CB&Q NE7 Waycar
RR Supply 90 ton Logging Mikado
1.6 CB&Q O1a Mikado
1.6 CB&Q NE7 Waycar
RR Supply 90 ton Logging Mikado
- steamin10
- Posts: 6712
- Joined: Sun Jun 08, 2003 11:52 pm
- Location: NW Indiana. Close to Lake Michigan S. tip
Re: Newbie Furnace build
I recommend CW Ammen, has a few books out about operation of foundry and its pitfalls. Dont try to reinvent the wheel here, this road is well traveled by experienced people. The gingery stuff is cleaver, but very short in utility, read that as dangerous in newbe hands. Go back in this topic and read some of the other questions and guidance before you delve into the Net, where the Darwin and Murphy clans live. There are some great things there, but keep your salt shaker handy, as most are total newbs.
Big Dave, former Millwright, Electrician, Environmental conditioning, and back yard Fixxit guy. Now retired, persuing boats, trains, and broken relics.
We have enough youth, how about a fountain of Smart. My computer beat me at chess, but not kickboxing
It is not getting caught in the rain, its learning to dance in it. People saying good morning, should have to prove it.
We have enough youth, how about a fountain of Smart. My computer beat me at chess, but not kickboxing
It is not getting caught in the rain, its learning to dance in it. People saying good morning, should have to prove it.
-
- Posts: 12
- Joined: Mon Oct 10, 2016 7:26 pm
- Location: Butner, NC
- Contact:
Re: Newbie Furnace build
I tell you what I used in the beginning, a propane powered furnace built using a mixture of materials available at the hardware store. I used 4 parts perlite and 1 part furnace cement (by weight) with a splash of water to thin it. Smear it around the inside of a steel container big enough to
This mixture is rated up to about 2000°F so it would be good for doing aluminum. Much more and it will start to flux but it's great to start with because you can get all of the materials local.
This mixture is rated up to about 2000°F so it would be good for doing aluminum. Much more and it will start to flux but it's great to start with because you can get all of the materials local.