gingery shaper

Home enthusiasts discuss their Foundry & Casting work.

Moderator: Harold_V

Post Reply
steve70
Posts: 3
Joined: Thu Mar 15, 2018 8:15 pm

gingery shaper

Post by steve70 » Sun Mar 18, 2018 8:12 pm

I was wondering if anyone close to cent. ill. would be willing to cast the parts for a metal shaper in return for a 6 by 18 craftsman metal lathe. I have the books on how to but have had cancer and do not feel like casting thanks steve

OddDuck
Posts: 245
Joined: Fri Dec 16, 2011 1:00 am
Location: Somewhere south of Mt. Katahdin
Contact:

Re: gingery shaper

Post by OddDuck » Wed Mar 21, 2018 2:22 pm

You might want to check www.alloyavenue.com . I know there are some on there who were working on the Gingery shaper. There are also quite a few metalcasters in the midwest, you might find one close by.
"If you took the bones out they wouldn't be crunchy!" -Monty Python's Flying Circus

steve70
Posts: 3
Joined: Thu Mar 15, 2018 8:15 pm

Re: gingery shaper

Post by steve70 » Thu Mar 22, 2018 11:08 pm

I will check that out. thank you very much! steve

Post Reply