It's AvE
https://www.youtube.com/watch?v=SzgPOJPTo_A
Lowbrow Machining
Moderator: Harold_V
Lowbrow Machining
Standards are so important that everyone must have their own...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
Re: Lowbrow Machining
There was probably a reason for this. Maybe machine tools would fit into agriculture tax relief or further confuse the situation. I can imagine a parameter of many tubers being machined to apply for a certain form and an entirely new department of tuber abuse by machinery. This is another way of registration of every machine tool into the FDA or something else. Blank Frank is in your menu, on the table and your venue.
- SteveHGraham
- Posts: 7788
- Joined: Sat Jan 17, 2009 7:55 pm
- Location: Florida
Re: Lowbrow Machining
That was just idiotic. No proper feed/speed calculation. No lube. Contact with the vise was completely inadequate and unsafe. That potato could have become a missile at any moment, and I'll just bet that guy wasn't wearing a face mask.
He should have done this on the lathe, using potato-shaped soft jaws. We'll probably hear more from Harold about that.
On a positive note, it's nice to see that Ireland now has a space program.
He should have done this on the lathe, using potato-shaped soft jaws. We'll probably hear more from Harold about that.
On a positive note, it's nice to see that Ireland now has a space program.
Every hard-fried egg began life sunny-side up.
Re: Lowbrow Machining
I kept wondering why he bothered frying the nut and bolt instead of heat treating them and frying the chips.
Re: Lowbrow Machining
Standards are so important that everyone must have their own...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...