Geometry Puzzle

The Junk Drawer is for those Off Topical discussions where we can ask questions of the community that we feel might have the ability to help out.

Moderator: Harold_V

User avatar
mklotz
Posts: 428
Joined: Thu Jan 09, 2003 11:35 am
Location: Los Angeles, CA, USA
Contact:

Re: Geometry Puzzle

Post by mklotz »

If you start with the large triangle as a single piece, you'll never reproduce the puzzle since smaller triangles sliced from the large one will have the same slope. The puzzle depends on the fact that the angles of the two smaller triangles are different. Given that fact, with their bases parallel, their hypotenuses can never form a continuous straight line.

I had hoped that when I pointed out the different slopes, folks would detect what was going on. I was wrong.
Regards, Marv

Home Shop Freeware
http://www.myvirtualnetwork.com/mklotz
User avatar
SteveHGraham
Posts: 7788
Joined: Sat Jan 17, 2009 7:55 pm
Location: Florida

Re: Geometry Puzzle

Post by SteveHGraham »

The real question is why ctwo is torturing us with this when we are clearly too stupid to figure it out.
Every hard-fried egg began life sunny-side up.
User avatar
ctwo
Posts: 2996
Joined: Tue Mar 27, 2012 12:37 pm
Location: Silly Cone Valley

Re: Geometry Puzzle

Post by ctwo »

I am sure you are familiar with misery loves company...
Standards are so important that everyone must have their own...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
User avatar
mklotz
Posts: 428
Joined: Thu Jan 09, 2003 11:35 am
Location: Los Angeles, CA, USA
Contact:

Re: Geometry Puzzle

Post by mklotz »

Here's one that's a bit simpler - no geometry, just simple algebra. It's a 'proof' that all the integers are equal to zero !

a = b
a² = ab
a² + a² = a² + ab
2a² = a² + ab
2a² - 2ab = a² + ab - 2ab
2a² - 2ab = a² - ab
2(a² - ab) = 1(a² - ab)
2 = 1

Now, if we subtract '1' from both sides, we have:

2 - 1 = 1 - 1
1 = 0

So, 0 = 1 = 2

Adding '1' we have:

1 + 1 = 2 + 1
2 = 3

We can continue adding '1' to both sides to prove that all the integers are equal to zero.

So, what's wrong here?
Regards, Marv

Home Shop Freeware
http://www.myvirtualnetwork.com/mklotz
User avatar
SteveHGraham
Posts: 7788
Joined: Sat Jan 17, 2009 7:55 pm
Location: Florida

Re: Geometry Puzzle

Post by SteveHGraham »

In the top series of equations, you multiplied by zero!

Let's see.

4(0) = 10(0)
4=10
Every hard-fried egg began life sunny-side up.
User avatar
mklotz
Posts: 428
Joined: Thu Jan 09, 2003 11:35 am
Location: Los Angeles, CA, USA
Contact:

Re: Geometry Puzzle

Post by mklotz »

Well done, Steve.

Technically, the problem is not MULTIPLYING by zero, which is legal.

4(0) = 10(0)

simply reduces to:

0 = 0

which is a tautology. It's when you DIVIDE by zero, an illegal operation, that you open up the possibility of "proving" almost anything.
Regards, Marv

Home Shop Freeware
http://www.myvirtualnetwork.com/mklotz
User avatar
SteveHGraham
Posts: 7788
Joined: Sat Jan 17, 2009 7:55 pm
Location: Florida

Re: Geometry Puzzle

Post by SteveHGraham »

This bit here is equivalent to my "proof," which I plan to submit for consideration for a Fields Medal.
2(a² - ab) = 1(a² - ab)
2 = 1
Every hard-fried egg began life sunny-side up.
User avatar
tornitore45
Posts: 2077
Joined: Tue Apr 18, 2006 12:24 am
Location: USA Texas, Austin

Re: Geometry Puzzle

Post by tornitore45 »

This is as old as the hills. It appears to be triangle but one side is ever so slightly concave to rob one unit square.
Mauro Gaetano
in Austin TX
TimOldman
Posts: 1
Joined: Tue Feb 13, 2018 2:02 pm

Re: Geometry Puzzle

Post by TimOldman »

tornitore45 wrote: Fri Nov 24, 2017 3:23 pm This is as old as the hills. It appears to be triangle but one side is ever so slightly concave to rob one unit square.

Probably that is old but I previously have never met it. We often solve short quizzes on the breaks at the college. Some of those in the thread are interesting to me. I gonna share with my friends, wanna make them confused
John Hasler
Posts: 1852
Joined: Tue Dec 06, 2016 4:05 pm
Location: Elmwood, Wisconsin

Re: Geometry Puzzle

Post by John Hasler »

> I wanted to machine it out of aluminum, but I think I will not be able to pull off a good enough illusion.

I think it depends on the edges being a little ragged. Machine it carefully out of metal and the lines will almost disappear in the assembly on the left while there will be glaring gaps in the assembly on the right. Maybe if you mill it with one of those DIY drill-press conversions?

Now let's see a Banach-Tarski sphere dissection done in Delrin. Or maybe with a piece of fruit.

https://en.wikipedia.org/wiki/Banach%E2 ... ki_paradox
TomB
Posts: 495
Joined: Mon Jan 14, 2008 7:49 pm
Location: Southern VT

Re: Geometry Puzzle

Post by TomB »

The pieces are not in the same arrangement Note that the two step pieces in the first image make a solid rectangle. Then the height of that rectangle is less that what is being perceived in the second arrangement. To make the triangles line up switch them. This makes the smaller triangle's height match the height of the two step pieces. The base of the larger triangle will match the width of the two adjacent step pieces.
Post Reply