I saw a discussion of DeWalt DW735 planers. They are very loud. Someone said the reason is that these planers have universal motors.
I have a DW735, and I don't really care about the noise, but I wondered: how hard would it be to put an AC motor in there?
Here's the problem: I have no idea how to figure out the dimensions and so on. When you buy a 1-phase or 3-phase motor, you can look up the frame and whatever and buy a motor you know will drop right in. Is there a chart somewhere that tells you which AC motor will fit in a hole left by which universal motor?
I can see why they use a universal motor. The replacement costs about fifty bucks.
Replacing Universal Motor with Induction Motor
Moderator: Harold_V
- SteveHGraham
- Posts: 7788
- Joined: Sat Jan 17, 2009 7:55 pm
- Location: Florida
Replacing Universal Motor with Induction Motor
Every hard-fried egg began life sunny-side up.
-
- Posts: 1852
- Joined: Tue Dec 06, 2016 4:05 pm
- Location: Elmwood, Wisconsin
Re: Replacing Universal Motor with Induction Motor
There are no standard dimensions for universal motors, but they generally have higher power density and much higher operating speed (that's why they are noisy) than induction motors. I think that you would have to mount the induction motor elsewhere and use a belt.
Re: Replacing Universal Motor with Induction Motor
Universal motors usually are of a proprietary design and designed to fit into the tool. Just think the difference between a motor in a stand mixer and a motor in a vacuum cleaner; both universal motors, but totally non-interchangeable.
Mr.Ron from South Mississippi