I want an extension hammer

The Junk Drawer is for those Off Topical discussions where we can ask questions of the community that we feel might have the ability to help out.

Moderators: Harold_V, websterz

Post Reply
spro
Posts: 7992
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

I want an extension hammer

Post by spro » Fri Feb 28, 2020 1:36 am

I think our Friend Dave would want us to go beyond. Newer topics and the inspirations. What about not having to haul out a ladder, to pounda freakin nail tight into a sagging gutter? What about a lot of things on roofing , where all it takes is impact at a distance. I expect is has already been done but I don't know that. Consider the higher energy from M18 M24 cordless power units , at the shoulder, driving an impact head 6'+' away. Rapid impact to pesky things as this. The nose would encompass the work or fastener and the ram would retract into it for location. And if it where to impact CW all the better.

spro
Posts: 7992
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: I want an extension hammer

Post by spro » Fri Feb 28, 2020 1:49 am

Serious miter gears at the head for the impact driven by a straight shaft. I can almost see it but need some help.

Post Reply