please tell me how to use the sheldon group
Moderators: Harold_V, Marty_Escarcega
-
- Posts: 17
- Joined: Wed Nov 24, 2010 12:40 am
please tell me how to use the sheldon group
I have been trying to find a manual for a vernon horz minn on the sheldon group with no luck.can any one tell me how to use this site
Re: please tell me how to use the sheldon group
While you may have good fortune and find the manual you seek, it isn't likely, not on this forum. The best thing you can do is go to the proper forum (mills in this case) and ask readers if they have anything to offer.anthonys1968 wrote:I have been trying to find a manual for a vernon horz minn on the sheldon group with no luck.can any one tell me how to use this site
Your question about a Sheldon group is puzzling. We don't have such a thing here---all machines are discussed, with no particular name brand having its own forum. Again, I recommend you go to the mill forum and ask of readers if they have anything to offer.
Harold
Wise people talk because they have something to say. Fools talk because they have to say something.
Re: please tell me how to use the sheldon group
anthonys1968,
I hope these help. Also I can send you the .pdf manual's I have on these as a email
attachment if you can send me a PM with your email address
in it.
Ken.
I hope these help. Also I can send you the .pdf manual's I have on these as a email
attachment if you can send me a PM with your email address
in it.
Ken.
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.