The authors of the site software are looking for suggestions to improve features of the software. If you have suggestions to improve the software, and board experience, feel free to post. Do note, there are no guarantees that they will come to fruition, but its good they are soliciting ideas.
Regards,
Marty
Site Software Suggestions
Moderators: Harold_V, Marty_Escarcega
-
- Site Admin
- Posts: 1730
- Joined: Wed Dec 18, 2002 8:17 pm
- Location: Mesa, AZ USA
Site Software Suggestions
"Jack of all Trades, Master of None"
- mechanicalmagic
- Posts: 1431
- Joined: Sun Nov 04, 2007 12:11 am
- Location: Pleasanton, CA Land of perfect weather
Re: Site Software Suggestions
I would like a Mark forums read button at the bottom of the page also.
Every day I ask myself, "What's the most fun thing to do today."
9x48 BP clone, 12x36 lathe, TIG, MIG, Gas, 3 in 1 sheetmetal.
9x48 BP clone, 12x36 lathe, TIG, MIG, Gas, 3 in 1 sheetmetal.
-
- Posts: 1274
- Joined: Thu Nov 01, 2012 10:39 am
- Location: South Central Alberta
Re: Site Software Suggestions
An increasing number of sites have a button at the bottom of the page that will take you to the top of the page, I like and use that on other sites. If there is another update sometime I think this would be a nice feature to include.
Thanks again for the site and a space to come and talk and learn!
Thanks again for the site and a space to come and talk and learn!
-
- Posts: 21
- Joined: Wed Feb 19, 2003 12:17 pm
- Location: Wellsville, KS
Re: Site Software Suggestions
Similar to mechanicalmagic's suggestion, I would like a "Mark forums read" on the unread posts page:
http://www.chaski.org/homemachinist/sea ... nreadposts
Currently I have to click on the "Board Index" link and then the "Mark forums read" link to clear out posts from the list.
Scott
http://www.chaski.org/homemachinist/sea ... nreadposts
Currently I have to click on the "Board Index" link and then the "Mark forums read" link to clear out posts from the list.
Scott