5-C collets ****SOLD****

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

John Evans
Posts: 1697
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

5-C collets ****SOLD****

Postby John Evans » Mon Apr 17, 2017 7:35 pm

ALL COLLETS NOW SOLD !!Picked up a lot of 5-C collets from a estate sale. Most all are Hardinge with a few German & Jap. They were poorly stored in a backyard shed ,so stained and were so dirty I had to use a brass wheel to get them cleaned up enough to read sizes. Some have tool kisses on the faces. Most have internal threads.State your wants and if internal threads and Hardinge are required. $3.50 each + shipping . 8 will fit a small flat rate box. Paypal prefered and put your wants on this thread . These will not be in good order listed :lol: quantity then size.
Hex 4of 3/4
1of 1/2,,1of 1/4
1of 1/8,2of 5/8,3of 3/8,1of7/8
,1of 5/16,2of 7/16
,1of 1-1/8
1of 29/64,,1of 33/64,
Attachments
collets 001.JPG
collets 002.JPG
collets 003.JPG
collets 004.JPG
Last edited by John Evans on Thu Apr 20, 2017 6:34 pm, edited 7 times in total.

stevep3916
Posts: 1
Joined: Fri Jul 11, 2014 8:48 am

Re: 5-C collets

Postby stevep3916 » Mon Apr 17, 2017 9:03 pm

i would like 1/4,5/16,3/8,1/2,5/8,3/4,1 inch all round external threads thanks steve

User avatar
mcostello
Posts: 698
Joined: Sat Jan 04, 2003 10:45 pm
Location: Lancaster, Ohio

Re: 5-C collets

Postby mcostello » Mon Apr 17, 2017 9:10 pm

7/16 hex will work for Me. Will Check sizes stocked later. Also can use 1/8,,9/32,17/64,1 1/16.

John Evans
Posts: 1697
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

Re: 5-C collets

Postby John Evans » Mon Apr 17, 2017 9:48 pm

Ok Steve & Mark you have PMs inbound.

Rolland
Posts: 272
Joined: Thu Feb 16, 2006 11:45 pm
Location: Camp Verde, AZ

Re: 5-C collets

Postby Rolland » Tue Apr 18, 2017 4:07 pm

John
I am still needing a 5/8 hex, 21/32-25/32-31/32

John Evans
Posts: 1697
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

Re: 5-C collets

Postby John Evans » Tue Apr 18, 2017 4:25 pm

Rolland:I can do 5/8hex &21/32 PM coming

Rolland
Posts: 272
Joined: Thu Feb 16, 2006 11:45 pm
Location: Camp Verde, AZ

Re: 5-C collets

Postby Rolland » Tue Apr 18, 2017 6:17 pm

do you need my address?

John Evans
Posts: 1697
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

Re: 5-C collets

Postby John Evans » Tue Apr 18, 2017 6:28 pm

Rolland : No I found it !

John Evans
Posts: 1697
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

Re: 5-C collets

Postby John Evans » Wed Apr 19, 2017 12:01 pm

OK list updated as 10AM MT 4-19

Rolland
Posts: 272
Joined: Thu Feb 16, 2006 11:45 pm
Location: Camp Verde, AZ

Re: 5-C collets

Postby Rolland » Wed Apr 19, 2017 5:59 pm

The check is in the mail

Rolland
Posts: 272
Joined: Thu Feb 16, 2006 11:45 pm
Location: Camp Verde, AZ

Re: 5-C collets

Postby Rolland » Thu Apr 20, 2017 7:16 pm

They arrived thanks

User avatar
SteveM
Posts: 6071
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: 5-C collets ****SOLD****

Postby SteveM » Fri Apr 21, 2017 6:06 am

For those of you still looking for collets, I also have a bunch that I picked up and will be selling, but it will take me a week or so to get to sorting them.

I have standard round collets, emergency collets and step chuck collets (the ones with oversize faces you bore to size, which can be 2" to 3" diameter).

Not accepting dibs on anything yet. Brain can't handle that. Plenty to go around.

Stay tuned.

Steve


Return to “Buy, Sell, Trade, Wanted, Free!”

Who is online

Users browsing this forum: No registered users and 1 guest