Big tap 3 piece sets - first group ****SOLD****

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
discodan
Posts: 22
Joined: Mon Oct 22, 2018 10:08 pm
Location: Annapolis, MD

Big tap 3 piece sets - first group ****SOLD****

Post by discodan » Tue Dec 04, 2018 11:41 am

These are big taps and each set includes a taper tap, a plug tap and a bottoming tap. Some are new and most look to be lightly used if used at all. Brands include Reiff & Nestor, Greenfield, HWM, Hanson, Brubaker, Morse and some unmarked. Sizes include:
1-3/4 8NC (2 sets)
1-3/4 5NC (2 sets)
1-3/8 6NC (3 sets)
1-1/4 7NC (6 sets)
1-1/8 7NC (3 sets)
1" 8NC (1set)

Some have light corrosion, mainly on the shank, not the cutter portion. I can clean before i send if you ask. A set of 3 taps is $15 plus shipping. I can send pics if you are really interested.

I have a second round I will post after I go through and see if there are 3 tap sets. Sizes in the second round go from 1-3/4" down to 1".

User avatar
wlw-19958
Posts: 1066
Joined: Fri Dec 22, 2006 5:41 pm
Location: Lewes, DE

Re: Big tap 3 piece sets - first group

Post by wlw-19958 » Tue Dec 04, 2018 3:19 pm

Hi There,

I would like a set of the 1-3/4" x 8NC please.
Do you accept PayPal? PM sent.

Good Luck!
-Blue Chips-
Webb

discodan
Posts: 22
Joined: Mon Oct 22, 2018 10:08 pm
Location: Annapolis, MD

Re: Big tap 3 piece sets - first group

Post by discodan » Tue Dec 04, 2018 10:23 pm

The 1-3/4 8NC taps are spoken for. I still have some of the other sets available.

Russ Hanscom
Posts: 1452
Joined: Wed Mar 15, 2006 11:10 pm
Location: Farmington, NM

Re: Big tap 3 piece sets - first group

Post by Russ Hanscom » Thu Dec 06, 2018 12:44 pm

How about one each 1", 1 1/8", 1 1/4" and 1 3/8"? I would prefer paypal.

Thanks

discodan
Posts: 22
Joined: Mon Oct 22, 2018 10:08 pm
Location: Annapolis, MD

Re: Big tap 3 piece sets - first group

Post by discodan » Thu Dec 06, 2018 10:08 pm

Russ Hanscom wrote:
Thu Dec 06, 2018 12:44 pm
How about one each 1", 1 1/8", 1 1/4" and 1 3/8"? I would prefer paypal.

Thanks
Russ, let me see what I can put together in those sizes and get back to you.

discodan
Posts: 22
Joined: Mon Oct 22, 2018 10:08 pm
Location: Annapolis, MD

Re: Big tap 3 piece sets - first group

Post by discodan » Thu Dec 06, 2018 10:58 pm

discodan wrote:
Thu Dec 06, 2018 10:08 pm
Russ Hanscom wrote:
Thu Dec 06, 2018 12:44 pm
How about one each 1", 1 1/8", 1 1/4" and 1 3/8"? I would prefer paypal.

Thanks
Russ, let me see what I can put together in those sizes and get back to you.
Russ, here is what I have at the moment but I have some sales pending on another site and I am only giving them until tomorrow to buy or decline. Here is what I have:
1" - set of Greenfield
1 1/8" - only have plug and bottom taps from Reiff & Nestor
1 1/4" - set of Reiff & Nestor
1 3/8" - mixed set

If the two guys on the other forum don't get back to me I may have a little better selection. So if you can hold tight for a day that would be great.

Russ Hanscom
Posts: 1452
Joined: Wed Mar 15, 2006 11:10 pm
Location: Farmington, NM

Re: Big tap 3 piece sets - first group

Post by Russ Hanscom » Fri Dec 07, 2018 1:23 pm

Fine, in no rush.

discodan
Posts: 22
Joined: Mon Oct 22, 2018 10:08 pm
Location: Annapolis, MD

Re: Big tap 3 piece sets - first group

Post by discodan » Fri Dec 07, 2018 3:59 pm

After I fulfill this initial group of sales, this first group of taps are SOLD. I will re-post with a second group of taps from 1" to 1-3/4" but some will be singles, 2-piece sets and some 3-piece sets.

User avatar
wlw-19958
Posts: 1066
Joined: Fri Dec 22, 2006 5:41 pm
Location: Lewes, DE

Re: Big tap 3 piece sets - first group ****SOLD****

Post by wlw-19958 » Sun Dec 09, 2018 1:48 pm

Hi There,

I got my taps Saturday and they look great!
Thanks a lot!

Good Luck!
-Blue Chips-
Webb

Post Reply