All Tool universal 5C collet indexing milling and grinding fixture. $200

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
User avatar
SteveM
Posts: 6382
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

All Tool universal 5C collet indexing milling and grinding fixture. $200

Post by SteveM » Wed Nov 01, 2017 8:57 pm

All Tool universal 5C collet indexing milling and grinding fixture.

Self contained indexer and tailstock. Uses 5C collets.

Holds up to 4-1/2" between centers, or you can use it without the center for grinding longer items or end grinding.

4-1/2" height from table to centerline when set horizontally.

Indexing wheel with 360 degrees of graduations, plus a built in indexing plate with 20 and 24 holes.

Rotates in the horizontal and vertical plane, with degree marking on both axes.

Includes original wooden box. Collet rack in box is broken, but is screwed in, so it can easily be replaced. Collet rack holds 15 collets, which would let you store an entire set of 16 collets from 1/16" to 1" including leaving one in the indexer.

$200 local pickup preferred. Could be shipped, but based on the size and weight, it would cost about $100 to go across the continental US (I calculated on USPS and FedEx).

Preference given to long-time board members in good standing.

Steve
Attachments
AllTool01.jpg
AllTool02.jpg
AllTool03.jpg
AllTool04.jpg
AllTool05.jpg

User avatar
SteveM
Posts: 6382
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: All Tool universal 5C collet indexing milling and grinding fixture. $200

Post by SteveM » Wed Nov 01, 2017 8:57 pm

More pictures.
Attachments
AllTool11.jpg
AllTool12.jpg
AllTool13.jpg
AllTool14.jpg
AllTool15.jpg

User avatar
SteveM
Posts: 6382
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: All Tool universal 5C collet indexing milling and grinding fixture. $200

Post by SteveM » Wed Nov 01, 2017 8:59 pm

Yet more pictures.
Attachments
AllTool23.jpg
AllTool24.jpg
AllTool25.jpg
AllTool21.jpg

johnfreese
Posts: 90
Joined: Thu Jan 21, 2016 2:10 am

Re: All Tool universal 5C collet indexing milling and grinding fixture. $200

Post by johnfreese » Thu Nov 02, 2017 6:12 pm

I will take it. Please PM me with the payment details.

Post Reply