WTT:7518 Porter Cable Router

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
kroll
Posts: 34
Joined: Fri Jun 20, 2014 6:10 am

WTT:7518 Porter Cable Router

Post by kroll » Thu Apr 05, 2018 7:48 pm

Never been use,this is the 3 1/4hp motor so its a brute.I have a 11" Delta lathe w/#3 Mt tail stock and the spindle is the LO I believe.So I am looking for wedge QCTP and holders,anything that will work with this lathe and test dial indicator etc.

User avatar
wlw-19958
Posts: 1042
Joined: Fri Dec 22, 2006 5:41 pm
Location: Lewes, DE

Re: WTT:7518 Porter Cable Router

Post by wlw-19958 » Fri Apr 06, 2018 1:45 am

Hi There,

If this is a Rockwell-Delta 11" lathe,
the spindle is L00.

Good Luck!
-Blue Chips-
Webb

johnfreese
Posts: 101
Joined: Thu Jan 21, 2016 2:10 am

Re: WTT:7518 Porter Cable Router

Post by johnfreese » Fri Apr 06, 2018 4:08 pm

If you will settle for a piston type BXA tool post, I have one.

kroll
Posts: 34
Joined: Fri Jun 20, 2014 6:10 am

Re: WTT:7518 Porter Cable Router

Post by kroll » Fri Apr 06, 2018 7:44 pm

Thanks webb,I just couldn't remember and John I think I am going to hold out for the wedge but your offer is very tempting

Post Reply