Bridgeport Series I 2HP Mill w/Servo 3-axis CNC conversion (SF Bay Area) PRICE REDUCED (again)****SOLD****

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
User avatar
Harlock
Posts: 3645
Joined: Tue Jan 23, 2007 1:19 am
Contact:

Bridgeport Series I 2HP Mill w/Servo 3-axis CNC conversion (SF Bay Area) PRICE REDUCED (again)****SOLD****

Post by Harlock » Wed Apr 18, 2018 11:43 pm

Update: Price reduced to $9,900.
New price: $8,900.00



For sale on behalf of a friend is a Bridgeport Series I 2HP Mill with a 3-axis Servo Pendant II CNC conversion, all in excellent shape, with many accessories. This mill is located in the South San Francisco Bay Area, California.

This machine has never been used in production, only occasionally used by hobbyists.

All servo motors, control boards and laptop are fully functional and the machine is ready to use. A huge advantage to this conversion is that it is still fully supported via servosource.com. The motors are direct drive, so manipulating the machine in manual mode with the motors disabled is very easy. There is no added resistance. The CNC system is super easy to use with either the computer or the control pad.

The variable speed head is tight, and even the back gear (low speed) sounds great. The original hand scrape marks are still fully visible on the Y-Axis ways, indicating very little wear.

The mill was outfitted with ball screws to go with the CNC installation, eliminating backlash. Combined with the servo motors this means you can climb mill to your heart's content with a great finish.

Please view the following video for a demonstration:



The purchaser gets the following:

Bridgeport Series I 2HP vertical mill, variable speed

Servo Products Pendant II 3-Axis CNC conversion with CNC software, laptop, dongle and main power and control unit. Features G-code execution, teach mode, basic plotting modes and manual traverse.

Trico Micro-drop MD-1200 coolant feed system

Phase-a-Matic static phase converter to run the mill on single phase power

Toe clamp set

Various T-nuts and extra threaded rods and nuts.

R8 collets

Kurt Angle-Lock Vice with rotary plate

Bridgeport name brand R8 right-angle quill adaptor

Spare belt for head

All manuals and documentation for mill, both manuals for Servo CNC system, coolant feed manual and phase converter manual

spare motor gaskets and shim tool for servo motors.

Asking Price: $12,000

Buyer picks up or arranges professional machinery movers.

This mill will be available for viewing by seriously interested parties and pick up from April 25th to April 29th. To settle priority order in the case of multiple interested parties, a $2,000 refundable deposit in advance will secure the mill for you. Otherwise it is first come first serve.

PM me if interested. More pictures in following post.
Attachments
18-03-16_tool-sale-8048.jpg
18-03-16_tool-sale-8049.jpg
18-03-16_tool-sale-8059.jpg
18-03-16_tool-sale-8670.jpg
18-03-16_tool-sale-8673.jpg
San Lorezo Flume & Lumber Co. #2 - "Felton"
Live Steam Photography and more - www.mikemassee.com
Contributing Editor, Live Steam Magazine
Webmaster, Allen Models of Nevada

User avatar
Harlock
Posts: 3645
Joined: Tue Jan 23, 2007 1:19 am
Contact:

Re: Bridgeport Series I 2HP Mill w/Servo 3-axis CNC conversion (SF Bay Area)

Post by Harlock » Wed Apr 18, 2018 11:44 pm

A few more pictures.
Attachments
18-03-16_tool-sale-8053.jpg
18-03-16_tool-sale-8056.jpg
18-03-16_tool-sale-8057.jpg
18-03-16_tool-sale-8051.jpg
18-03-16_tool-sale-8667.jpg
San Lorezo Flume & Lumber Co. #2 - "Felton"
Live Steam Photography and more - www.mikemassee.com
Contributing Editor, Live Steam Magazine
Webmaster, Allen Models of Nevada

User avatar
Harlock
Posts: 3645
Joined: Tue Jan 23, 2007 1:19 am
Contact:

Re: Bridgeport Series I 2HP Mill w/Servo 3-axis CNC conversion (SF Bay Area)

Post by Harlock » Wed Apr 18, 2018 11:44 pm

Spare belt and CNC manuals.
Attachments
18-03-16_tool-sale-8680.jpg
18-03-16_tool-sale-152653.jpg
San Lorezo Flume & Lumber Co. #2 - "Felton"
Live Steam Photography and more - www.mikemassee.com
Contributing Editor, Live Steam Magazine
Webmaster, Allen Models of Nevada

User avatar
Harlock
Posts: 3645
Joined: Tue Jan 23, 2007 1:19 am
Contact:

Re: Bridgeport Series I 2HP Mill w/Servo 3-axis CNC conversion (SF Bay Area)

Post by Harlock » Thu May 10, 2018 2:22 pm

Update: Price reduced to $9,900. (mods can you note on thread title, thank you)

Also, this mill comes with a complete copy of GibbsCAM 2000 including manual, discs and dongle. (the dongle on the laptop is for GibbsCAM, not ServoCNC which uses a software solution)

Many parts were made on this machine using GibbsCAM and the Servo Pendant software. Super easy to use.
Attachments
20180428_162355.jpg
San Lorezo Flume & Lumber Co. #2 - "Felton"
Live Steam Photography and more - www.mikemassee.com
Contributing Editor, Live Steam Magazine
Webmaster, Allen Models of Nevada

User avatar
Harlock
Posts: 3645
Joined: Tue Jan 23, 2007 1:19 am
Contact:

Re: Bridgeport Series I 2HP Mill w/Servo 3-axis CNC conversion (SF Bay Area) PRICE REDUCED

Post by Harlock » Sat Jun 02, 2018 1:39 am

Price reduced to $8,900.
San Lorezo Flume & Lumber Co. #2 - "Felton"
Live Steam Photography and more - www.mikemassee.com
Contributing Editor, Live Steam Magazine
Webmaster, Allen Models of Nevada

User avatar
Harlock
Posts: 3645
Joined: Tue Jan 23, 2007 1:19 am
Contact:

Re: Bridgeport Series I 2HP Mill w/Servo 3-axis CNC conversion (SF Bay Area) PRICE REDUCED (again)

Post by Harlock » Mon Jun 25, 2018 6:50 pm

SOLD thanks for looking.
San Lorezo Flume & Lumber Co. #2 - "Felton"
Live Steam Photography and more - www.mikemassee.com
Contributing Editor, Live Steam Magazine
Webmaster, Allen Models of Nevada

Post Reply