WTB 60T 18DP Aluminum Gear

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
dly31
Posts: 1052
Joined: Sun Jun 27, 2004 11:29 pm
Location: Northeast Alabama

WTB 60T 18DP Aluminum Gear

Post by dly31 » Wed Feb 20, 2019 10:40 pm

Need replacement gear for SB Fourteen lathe speed control. Existing gear is 14.5 PA, 1/4" wide and has a 1" bore. PM or "donandjune #at#att#dot#net".

Don Young
Don Young

Lazz
Posts: 131
Joined: Sun Jul 29, 2012 11:06 pm
Location: The Warm Arizona Deserts... Phoenix to be precise...

Re: WTB 60T 18DP Aluminum Gear

Post by Lazz » Thu Feb 21, 2019 8:10 pm

I was going to offer the gear cutting service you want.
And of course after checking the proper cutter can not be found....
If you only wanted a 54 tooth gear... I could do that...

dly31
Posts: 1052
Joined: Sun Jun 27, 2004 11:29 pm
Location: Northeast Alabama

Re: WTB 60T 18DP Aluminum Gear

Post by dly31 » Thu Feb 21, 2019 9:14 pm

Thanks for the offer. I bought a few 18DP 14.5 PA cutters a long time ago. If I can find them and the proper one is included I could furnish it to you. I do not have anything set up to do gear cutting yet. I will be in touch.
Don Young

Lazz
Posts: 131
Joined: Sun Jul 29, 2012 11:06 pm
Location: The Warm Arizona Deserts... Phoenix to be precise...

Re: WTB 60T 18DP Aluminum Gear

Post by Lazz » Fri Feb 22, 2019 11:02 am

If you have the correct involute gear cutter Ill be glad to cut you a gear...

tetramachine
Posts: 148
Joined: Sun Mar 19, 2006 6:27 pm
Location: NJ
Contact:

Re: WTB 60T 18DP Aluminum Gear

Post by tetramachine » Fri Feb 22, 2019 5:36 pm

Are you sure you want AL for the gear, Bronze or iron seems more common in that application. I do have a full set of 18dp cutters, Not sure the PA, need to measure the last ones I cut to be sure.

Does the gear have a Hub, Keyway, bushing?
Let me know if you would like me to cut one for you.
You could send me a blank or I can make one .
Tom
My wheels don't slow me down

dly31
Posts: 1052
Joined: Sun Jun 27, 2004 11:29 pm
Location: Northeast Alabama

Re: WTB 60T 18DP Aluminum Gear

Post by dly31 » Sat Mar 16, 2019 10:18 pm

Thanks to tetramachine I have the gear and a couple of spares. Thanks again to Lazz for the offer.
Don Young

Post Reply