Unfortunate Downsizing - Need to Sell Shop ****SOLD****

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
User avatar
John_S
Posts: 709
Joined: Wed Apr 06, 2011 8:21 pm
Location: Cumming, GA

Unfortunate Downsizing - Need to Sell Shop ****SOLD****

Post by John_S » Sat Jun 22, 2019 7:37 pm

Unfortunately the need has arisen that I must downsize and part with my shop. Everything is in 100% perfect working condition and is sold as-is where-is (no shipping, you must pick up). Everything is negotiable, make me an offer.

Grizzly 10x22 lathe, model # G0602, ( https://www.grizzly.com/products/Grizzl ... athe/G0602 )
Comes with everything it originally shipped with (3 jaw, 4 jaw, faceplate, steady rest, follow rest, tailstock) plus a quick change tool post, tool holders, dead centers, tailstock arbor and drill chuck, and a lot of brazed carbide cutting tools. Includes stand and a brand new insert holder and inserts (never had a chance to use them!).
Would like to get $1000.00 for everything.
lathe1.jpg
lathe2.jpg

Grizzly 6x26 vertical knee mill, (discontinued, specs here https://cdn0.grizzly.com/specsheets/g3102_ds.pdf )
Includes all original equipment, parts etc. This mill has been converted to 220V with a heavy duty rotary Forward/Off/Reverse switch. Also has replacement US made start and run capacitors. Comes with two vices, rotary table, R8 collets, quick change drill chuck, insert face mill, slitting saw, lots of drills and cutting tools.
Would like to get $1400.00 for everything.
mill1.jpg
mill2.jpg
mill7.jpg
Miller CST-280 DC TIG/stick welder (https://www.millerwelds.com/equipment/w ... 280-m00180). Comes with foot pedal, TIG torch & lead w/gas, GND/POS leads and argon bottle. Lots of electrodes included.
Would like to get $1000 for everything.

Also have a lot of other tools that need to go:
Bench grinder with a white alum ox wheel on the left and a diamond wheel on the right for sharpening any type of cutting tool, would like $100.

4-1/2" horz/vert bandsaw (older version of this import model, https://www.northerntool.com/shop/tools ... _200659143 ). $100.

14" woodcutting vertical band saw (typical import model), $150.


All kinds of calipers, micrometer, parallels, taps/dies, etc. common shop tools that I'm willing to take offers on. If interested, ask for more details.

All of this is located in Cumming, Georgia, about 30 minutes northeast of Atlanta. Best time for me is M-F after 7pm and any time on the weekend.

User avatar
John_S
Posts: 709
Joined: Wed Apr 06, 2011 8:21 pm
Location: Cumming, GA

Re: Unfortunate Downsizing - Need to Sell Shop

Post by John_S » Sun Jun 30, 2019 5:16 pm

All sold.

User avatar
SteveM
Posts: 6853
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: Unfortunate Downsizing - Need to Sell Shop

Post by SteveM » Sun Jun 30, 2019 6:41 pm

I'm sorry you had to sell your shop, but glad you were able to get it done in a reasonable time.

We're still selling off my dad's shop two years after we started, although we got most of the machines done in a year.

Steve

Post Reply