WTB 7ba tap and die.

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
Lazz
Posts: 136
Joined: Sun Jul 29, 2012 11:06 pm
Location: The Warm Arizona Deserts... Phoenix to be precise...

WTB 7ba tap and die.

Post by Lazz » Sun Jul 14, 2019 6:55 pm

Are there any HSS Ba taps and dies out there .
Most of the new Ebay are from India and well.... no matter how cheap the price is I cant make myself buy them.... Not to mention they are carbon steel...
The few used I have found are from the UK and shipping kills most deals.

I could use a 7ba tap and die... but I would be willing to buy incomplete set if it included the #7s I need...

Thanks in advance.

User avatar
BAdams
Posts: 174
Joined: Wed Feb 23, 2011 7:15 pm
Location: Moreno Valley, CA

Re: WTB 7ba tap and die.

Post by BAdams » Sun Jul 14, 2019 7:20 pm

A Google search turned up a place in NY:
https://Britishfasteners.com

I know nothing about them, just found them in a search.

Brook

Lazz
Posts: 136
Joined: Sun Jul 29, 2012 11:06 pm
Location: The Warm Arizona Deserts... Phoenix to be precise...

Re: WTB 7ba tap and die.

Post by Lazz » Sun Jul 14, 2019 10:28 pm

BAdams wrote:
Sun Jul 14, 2019 7:20 pm
https://Britishfasteners.com
I found that site as well....
The HSS taps are $47.50.
The unlabeled taps are $7.26 So im guessing they are the same carbon steel available from India for much less.
When there is no description I tend question quality....

Thank you for the input...

LIALLEGHENY
Posts: 186
Joined: Sat Jan 11, 2014 12:36 am
Location: Bohemia, NY

Re: WTB 7ba tap and die.

Post by LIALLEGHENY » Mon Jul 15, 2019 3:25 am

Lazz,

I did a Google search -- 7ba HSS tap -- and came up with quite a few suppliers in UK offering them. I would contact them and ask where they are made ( I am not a fan of anything made in India or China as well) I don't think shipping will be as bad as you think. I just bought some large INA bearings that came through UK and the shipping was quite reasonable.

Nyle

Lazz
Posts: 136
Joined: Sun Jul 29, 2012 11:06 pm
Location: The Warm Arizona Deserts... Phoenix to be precise...

Re: WTB 7ba tap and die.

Post by Lazz » Mon Jul 15, 2019 10:51 am

I found a UK Ebay deal that fit my needs... With shipping about $3 per tap and die... For NOS HSS name brand Presto...

I agree shipping from the UK isnt all that bad... With a daughter in Australia I have found out all about expensive shipping...

Just like here some of the UK Ebay dealers were asking big bucks to ship...

Thanks again...

Kenng
Posts: 30
Joined: Thu Jul 02, 2015 3:05 pm
Location: N.W. Montana

Re: WTB 7ba tap and die.

Post by Kenng » Sat Jul 20, 2019 10:18 am

Very interesting as I have recently had need for a 7BA tap and used British fasteners got the cheaper one and am very satisfied with their service. it seems even as BA stuff goes the 7BA screws etc are kind of obscure. Curious as to what you need them for? My purpose was for making darts that will accept a proprietary shaft and flight system.

Lazz
Posts: 136
Joined: Sun Jul 29, 2012 11:06 pm
Location: The Warm Arizona Deserts... Phoenix to be precise...

Re: WTB 7ba tap and die.

Post by Lazz » Sun Jul 21, 2019 12:00 am

Unfortunately I watch too much Youtube....
As I drink my morning coffee I watch https://www.youtube.com/user/keithappleton/videos.
FYI he may be an expert on Steam Engines... His machining practices leave a lot to be desired....

He often repairs Stuart Model steam engines.... So I found a half finished 10v... When I get the taps Ill finish be able to fix a couple of the poorly threaded or cross threaded holes that allow the engine to leak real well but not run all that well...

I was wondering if I wanted to try my hand at building some of those nifty models...
And repairing this one has answered that question....These darn models remind me of working on clocks....
I do not like using tweezers to install nuts and bolts....

So that sir is why I need BA taps and dies....

Kenng
Posts: 30
Joined: Thu Jul 02, 2015 3:05 pm
Location: N.W. Montana

Re: WTB 7ba tap and die.

Post by Kenng » Sun Jul 21, 2019 8:13 pm

Ok sir went out and found my taps. I have bought from both the BF in England and their subsidiary here I got a set of 2BA from both places. I got two different manufactures so I looked them up one is Volkel and the other is Totem. The Totem are made in India but are HSS not the carbon steel. The Volkel I am not sure of but they are HHS also. The 7ba I have is marked Apex UK HSS couldn't find much on Apex but box says for industrial use only :roll: for what that's worth. They all have seemed to work well and are sharp.

Post Reply