5mm parting blades

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
User avatar
SteveM
Posts: 7045
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

5mm parting blades

Post by SteveM » Sat Feb 15, 2020 5:53 pm

Here's some parting blades I couldn't push with the Atlas unless I put a rope around the chuck and pulled on it.

These are 5mm wide and have the markings 151.2-25-50 on them, which appears to be a Sandvik designation:
https://www.sandvik.coromant.com/en-us/ ... 51.2-25-50

They take Q-Cut 151.2 size 50 inserts.

They are $120 each on Amazon.
https://www.amazon.com/Sandvik-Coromant ... B00O1KMEP4

I'll do $20 each, or $40 for all four of them plus the flat rate box.

Steve
Attachments
Sandvik (4).jpg
Sandvik (1).jpg
Sandvik (2).jpg
Sandvik (3).jpg

Russ Hanscom
Posts: 1635
Joined: Wed Mar 15, 2006 11:10 pm
Location: Farmington, NM

Re: 5mm parting blades

Post by Russ Hanscom » Sat Feb 15, 2020 6:42 pm

Too bad they are not half that width.

Post Reply