Soft Jaws

The Photo Album is a place for "Shop Shots" as well as pictures and descriptions of projects that we are working on. Show off your Shops, Machines, and your Projects!

Moderators: Harold_V, WJH

User avatar
SteveM
Posts: 6453
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: Soft Jaws

Post by SteveM » Thu May 31, 2018 10:38 pm

A friend asked me to drill a hole in the center of about 30 stainless steel caps.

Bored the soft jaws to the needed diameter with a should to hold them with the face perpendicular and we knocked them off in no time.

Steve

Glenn Brooks
Posts: 1189
Joined: Mon Nov 10, 2014 1:39 pm
Location: Woodinville, Washington

Re: Soft Jaws

Post by Glenn Brooks » Sun Jun 17, 2018 2:13 pm

Steve, thanks for posting this write up. Many people have commented on soft jaws but I’ve never seen an actual description and photos of parts made with them that made sense. The workholding really points out how to make these things work and how they can be used.

Very beneficial.

Glenn
Moderator - Grand Scale Forum

Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge

Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....

Post Reply