In the pic is a quick change toolpost. Instead of a cam lock I used a 1/4-20 shcs to tighten the dovetail. It has worked well for 3 years now.
Jim
Home built Q/C toolpost
Moderator: Harold_V
-
- Posts: 2281
- Joined: Sat Jan 04, 2003 8:33 pm
- Location: 40 Miles West of Chicago/near DeKalb
- Contact:
Home built Q/C toolpost
Tool & Die Maker/Electrician, Retired 2007
So much to learn and so little time.
www.outbackmachineshop.com
So much to learn and so little time.
www.outbackmachineshop.com