Anzani Y aero engine

This Forum is dedicated to the Hobbyist I.C. (Internal Combustion) Engine Community.

Moderators: JackF, Harold_V

Post Reply
User avatar
Adirondack
Posts: 410
Joined: Tue Aug 23, 2011 6:59 pm
Location: southern CT

Anzani Y aero engine

Post by Adirondack »

Hi folks. I'm looking for plans to build an Anzani Y type for my Bleriot replica. Is there anyone with a set squirreled away that they would part with? They were once offered by a chap from England.

Did I mention that I planned on scaling up to full size? :P

Thanks

ADK
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/

A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
solek
Posts: 58
Joined: Wed Apr 16, 2003 6:19 pm

Re: Anzani Y aero engine

Post by solek »

The magazine "Stricty I. C." , Issues 81, 82, 83, & 84, had the plans to make a 1/4 scale, Anzani, 3 cylinder engine. You use to be able to buy, them, but don't know, if you still can.
User avatar
Adirondack
Posts: 410
Joined: Tue Aug 23, 2011 6:59 pm
Location: southern CT

Re: Anzani Y aero engine

Post by Adirondack »

solek wrote:The magazine "Stricty I. C." , Issues 81, 82, 83, & 84, had the plans to make a 1/4 scale, Anzani, 3 cylinder engine. You use to be able to buy, them, but don't know, if you still can.
Great. Thanks.
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/

A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
byawor
Posts: 5
Joined: Wed Feb 18, 2009 7:56 pm
Location: Regina, Canada

Re: Anzani Y aero engine

Post by byawor »

i have a set
Post Reply