Hello,
I'm searching for some oil cups (please correct me if I'm using the wrong terminology) [img]/ubb/images/graemlins/shocked.gif"%20alt="[/img] Similiar to these in the attachment. The threads are 1/4" diameter.
Would anyone have a recommended source? TIA
Ray [img]/ubb/images/graemlins/cool.gif"%20alt="[/img]
source for oil cups
-
- Posts: 158
- Joined: Sat Jan 04, 2003 12:33 pm
- Location: Huntsville, AL U.S.A.
-
- Posts: 373
- Joined: Sat Jan 04, 2003 1:05 pm
Re: source for oil cups
Here's a potential source:
http://www.catfish-hollow.com/me-acc.htm
You might also try web searches for "Sulphur Springs" and "PM Research" or "the North American Model Engineering Show" and check links for the vendors that display there.
Mike
http://www.catfish-hollow.com/me-acc.htm
You might also try web searches for "Sulphur Springs" and "PM Research" or "the North American Model Engineering Show" and check links for the vendors that display there.
Mike
Mike, near Chicago
-
- Posts: 158
- Joined: Sat Jan 04, 2003 12:33 pm
- Location: Huntsville, AL U.S.A.
Re: source for oil cups
Thanks for the lead! [img]/ubb/images/graemlins/cool.gif"%20alt="[/img] Ray
Re: source for oil cups
Hi Ray,
I am new to the forum, and even though your post is from 2003...if you still need an outlet for oil cups , anytime in the future, MSC has them in stock! O just ordered some for my lathe.
Hope it helps... Mom said, "better late than never."
Dinkin'
I am new to the forum, and even though your post is from 2003...if you still need an outlet for oil cups , anytime in the future, MSC has them in stock! O just ordered some for my lathe.
Hope it helps... Mom said, "better late than never."
Dinkin'
Re: source for oil cups
Welcome to the board ! Many things are helpful and sought as they were before and it was good to mention MSC still provides them.