Shelly's 1/3 Woodpecker hit and miss engine

This Forum is dedicated to the Hobbyist I.C. (Internal Combustion) Engine Community.

Moderators: Harold_V, JackF

Post Reply
gbritnell
Posts: 11
Joined: Sun Feb 20, 2011 10:07 am

Shelly's 1/3 Woodpecker hit and miss engine

Post by gbritnell » Tue Jun 28, 2011 10:42 pm

Gentlemen,
I am currently building the aforementioned hit and miss engine. The drawing for the base casting doesn't have a dimension from the crank centerline to the head deck. If anyone has built one of these and has come up with a dimension that works I would certainly appreciate hearing from you.
Thanks,
gbritnell

Post Reply