New Here, old here.

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
tjnak
Posts: 1
Joined: Mon Jun 01, 2015 8:23 pm

New Here, old here.

Post by tjnak »

Hello all.

TJ Clark from Anchorage Alaska.

I have been abusing tooling with my borrowed Smithy Granite 1324 your several years. Thought I should stop and get some real knowledge of this practice.
Torch
Posts: 1684
Joined: Wed Mar 17, 2010 7:58 am
Location: Muskoka

Re: New Here, old here.

Post by Torch »

Well you've certainly come to the right place to find machining advice. There's a wealth of knowledge available here, especially in the "general discussion" section. This area is pretty good for questions specific to the 3-in-1 format machines.
Post Reply