CB-1220 Mod

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
NateD
Posts: 25
Joined: Thu Mar 08, 2012 1:34 pm
Location: Sandia Park, NM

CB-1220 Mod

Post by NateD »

Youtube video on some CB-1220 mods.
https://www.youtube.com/watch?v=pi9Y6MZkhiU

User avatar
ken572
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

Re: CB-1220 Mod

Post by ken572 »

Hello Nate :D

Thanks for the share..

Interesting 8) :idea: and Fun Humor :lol:

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
Post Reply