Motor wiring

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
dakerstrom
Posts: 1
Joined: Mon Dec 25, 2017 10:59 am

Motor wiring

Post by dakerstrom »

Does anyone have a schematic of the 4 terminal motor wiring for the Chinese HQ400 machine,or an explanation of page 7 in the instruction manual?
User avatar
ALCOSTEAM
Posts: 761
Joined: Tue Feb 04, 2003 9:20 am
Location: illinois

Re: Motor wiring

Post by ALCOSTEAM »

HQ400 manual motor wiring.jpg
V1 and V2 are the run winding in the motor

U1 and U2 are the start winding


L1 to V1, U1 and N to V2,U2 motor will run one direction

L1 to V1, U2 and N to V2, U1 motor will run in opposite direction
Post Reply