This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.
- Posts: 1
- Joined: Mon Dec 25, 2017 10:59 am
Does anyone have a schematic of the 4 terminal motor wiring for the Chinese HQ400 machine,or an explanation of page 7 in the instruction manual?
- Posts: 622
- Joined: Tue Feb 04, 2003 9:20 am
- Location: illinois
U1 and U2 are the start winding
L1 to V1, U1 and N to V2,U2 motor will run one direction
L1 to V1, U2 and N to V2, U1 motor will run in opposite direction
V1 and V2 are the run winding in the motor