Tool post

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
cobra
Posts: 27
Joined: Thu Jan 29, 2009 10:48 am
Location: Moncton, New Brunswick

Tool post

Post by cobra »

As SCH said the AXA fits great. You will have to make up a T-nut. I swaped out the hold down nut for the handle that came with the machine for the tool post as I prefer the handle on the nut.
Living in the Maritimes
Building a new Brewery and team
Driving a 65 Cobra up the Fundy coast
Dosen't get much better!
Top
Post Reply

Return to “3-in-1 Metalworking Machines”