just a hello and here is how I use my Grizzly 4015Z

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
User avatar
chipmakerkid
Posts: 7
Joined: Thu Jul 29, 2010 9:16 pm
Location: So Cal
Contact:
Contact chipmakerkid

Re: just a hello and here is how I use my Grizzly 4015Z

Post by chipmakerkid »

steamin10 -- Ah, a DOHC, I thought you said it was an earlier model SOHC. Very fussy carbs those on the DOHC.

Mike
Top
Post Reply

Return to “3-in-1 Metalworking Machines”